Initializing AMReX (26.10-99-ge9f9a648e462)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
OMP initialized with 1 OMP threads
AMReX (26.10-99-ge9f9a648e462) initialized
   MFIX git describe: 26.10-34-gce47b6b30294
AMReX-Hydro git hash: a153304acd787205b170b0f7fd8284627e076056
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.01268663913
MLMG: Iteration   2 Fine resid/bnorm = 0.0001551137621
MLMG: Iteration   3 Fine resid/bnorm = 2.368476579e-06
MLMG: Iteration   4 Fine resid/bnorm = 5.277097247e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.73279691e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.730561923e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.754840235e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.694292531e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.430526616e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.810361665e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.680959107e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.341917208e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.047865889e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.223466249e-10, 2.047865889e-12
MLMG: Timers: Solve = 0.147021198 Iter = 0.121494791 Bottom = 0.012636795
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  5.753175714e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  1.353805956e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08880464396
MLMG: Iteration   2 Fine resid/bnorm = 0.003801801426
MLMG: Iteration   3 Fine resid/bnorm = 0.0001815046413
MLMG: Iteration   4 Fine resid/bnorm = 8.740867642e-06
MLMG: Iteration   5 Fine resid/bnorm = 4.055809418e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.88762658e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.440229178e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.534157766e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.668829544e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.767090578e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 5.974110096e-12, 1.668829544e-12
MLMG: Timers: Solve = 0.058122101 Iter = 0.055835617 Bottom = 0.014605533
 >> After projection
  * On level 0 max(abs(diveu)) = 1.358861181e-10
  * On level 1 max(abs(diveu)) = 1.439965926e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  5.383502973e-13
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  1.231634108e-12
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.008200357351
MLMG: Iteration   2 Fine resid/bnorm = 0.0001084397312
MLMG: Iteration   3 Fine resid/bnorm = 1.572860988e-06
MLMG: Iteration   4 Fine resid/bnorm = 2.604422161e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.635057133e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.574871416e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.583402483e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.616432064e-12
MLMG: Iteration   8 Crse resid/bnorm = 8.452630888e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.68318967e-13
MLMG: Iteration   9 Crse resid/bnorm = 9.081970055e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 4.042185336e-11, 9.081970055e-12
MLMG: Timers: Solve = 0.130382114 Iter = 0.108923336 Bottom = 0.012570524
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  5.553233937e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  1.191472675e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.0227540725
MLMG: Iteration   2 Fine resid/bnorm = 0.001312338683
MLMG: Iteration   3 Fine resid/bnorm = 5.738866024e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.763596935e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.351101436e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.581439711e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.146698966e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.456622323e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.480838791e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.551710436e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.752230897e-12, 6.480838791e-13
MLMG: Timers: Solve = 0.057604096 Iter = 0.055814485 Bottom = 0.014973024
 >> After projection
  * On level 0 max(abs(diveu)) = 2.497016773e-11
  * On level 1 max(abs(diveu)) = 3.291866568e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  5.561595095e-13
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  4.554433568e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  1.184559024e-12
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  9.094862182e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.001849722311
MLMG: Iteration   2 Fine resid/bnorm = 2.501641791e-05
MLMG: Iteration   3 Fine resid/bnorm = 4.744685422e-07
MLMG: Iteration   4 Fine resid/bnorm = 1.344941732e-08
MLMG: Iteration   5 Fine resid/bnorm = 6.474555258e-10
MLMG: Iteration   6 Fine resid/bnorm = 5.551134943e-11
MLMG: Iteration   7 Fine resid/bnorm = 5.568777284e-12
MLMG: Iteration   7 Crse resid/bnorm = 4.860975832e-10
MLMG: Iteration   8 Fine resid/bnorm = 5.53471871e-13
MLMG: Iteration   8 Crse resid/bnorm = 4.831351953e-11
MLMG: Iteration   9 Fine resid/bnorm = 5.541530425e-14
MLMG: Iteration   9 Crse resid/bnorm = 4.82949742e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 3.345373674e-12, 4.82949742e-12
MLMG: Timers: Solve = 0.127468937 Iter = 0.109387003 Bottom = 0.011990207
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  5.099373154e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  1.147035594e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02144402612
MLMG: Iteration   2 Fine resid/bnorm = 0.001136924491
MLMG: Iteration   3 Fine resid/bnorm = 4.908648374e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.380430986e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.182157886e-07
MLMG: Iteration   6 Fine resid/bnorm = 5.886826642e-09
MLMG: Iteration   7 Fine resid/bnorm = 2.88919727e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.380080148e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.351997263e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.913490323e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.9343163e-12, 6.351997263e-13
MLMG: Timers: Solve = 0.057756555 Iter = 0.056217433 Bottom = 0.015528106
 >> After projection
  * On level 0 max(abs(diveu)) = 2.774211725e-11
  * On level 1 max(abs(diveu)) = 3.084004753e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  5.049183324e-13
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  2.107920257e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  1.141097936e-12
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  6.202707453e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.0003000102902
MLMG: Iteration   2 Fine resid/bnorm = 2.70517134e-06
MLMG: Iteration   3 Fine resid/bnorm = 6.80597581e-08
MLMG: Iteration   4 Fine resid/bnorm = 4.434232785e-09
MLMG: Iteration   5 Fine resid/bnorm = 3.483457736e-10
MLMG: Iteration   6 Fine resid/bnorm = 2.851242145e-11
MLMG: Iteration   7 Fine resid/bnorm = 2.400227559e-12
MLMG: Iteration   7 Crse resid/bnorm = 2.427207723e-10
MLMG: Iteration   8 Fine resid/bnorm = 2.070474966e-13
MLMG: Iteration   8 Crse resid/bnorm = 2.382134964e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.823578893e-14
MLMG: Iteration   9 Crse resid/bnorm = 2.351347741e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 1.087073302e-12, 2.351347741e-12
MLMG: Timers: Solve = 0.126372524 Iter = 0.11007151 Bottom = 0.012887093
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  5.332166866e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  1.222248951e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      1.614746171

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649206
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.0211598841
MLMG: Iteration   2 Fine resid/bnorm = 0.001120907939
MLMG: Iteration   3 Fine resid/bnorm = 4.818032549e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.337859613e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.161924109e-07
MLMG: Iteration   6 Fine resid/bnorm = 5.783448193e-09
MLMG: Iteration   7 Fine resid/bnorm = 2.834753849e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.34858813e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.168653775e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.916254857e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.86997375e-12, 6.168653775e-13
MLMG: Timers: Solve = 0.058146231 Iter = 0.056365791 Bottom = 0.015713142
 >> After projection
  * On level 0 max(abs(diveu)) = 2.220745121e-11
  * On level 1 max(abs(diveu)) = 3.084350242e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  5.376203604e-13
   max(abs(gpx/gpy/gpz))  = 14.22686542  14.22686542  1.831414103e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.261820291e-12
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  6.080784853e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.007586520303
MLMG: Iteration   2 Fine resid/bnorm = 9.935873836e-05
MLMG: Iteration   3 Fine resid/bnorm = 1.43932637e-06
MLMG: Iteration   4 Fine resid/bnorm = 2.423448435e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.460938695e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.468450777e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.489611497e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.522318566e-12
MLMG: Iteration   8 Crse resid/bnorm = 8.526642078e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.57141095e-13
MLMG: Iteration   9 Crse resid/bnorm = 9.138271432e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 3.910161951e-11, 9.138271432e-12
MLMG: Timers: Solve = 0.125160853 Iter = 0.108784961 Bottom = 0.012876874
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  2.188704226e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  6.630845806e-13
   Time per fluid step      0.446515598
   Time per step        0.447853693
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.457883358
Time spent in main      2.072629529

AMReX (26.10-99-ge9f9a648e462) finalized