Initializing AMReX (26.11-3-g75c804923cd5)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
OMP initialized with 1 OMP threads
AMReX (26.11-3-g75c804923cd5) initialized
   MFIX git describe: 26.11-10-ge24e853095d0
AMReX-Hydro git hash: 154572aa6cf22c35a69729c74a0276909b96d5e3
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.01280640799
MLMG: Iteration   2 Fine resid/bnorm = 0.0001622534766
MLMG: Iteration   3 Fine resid/bnorm = 2.335932182e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.852701014e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.628245912e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.276369412e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.151237201e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.101804514e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.629480338e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.096733429e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.391285807e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 3.81837625e-10, 6.391285807e-12
MLMG: Timers: Solve = 0.180637329 Iter = 0.149092176 Bottom = 0.012050875
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47877986  1.47877986  1.097288926e-12
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.526266743  1.526266743  2.488204087e-12
Doing initial pressure iterations with dt = 0.004606829071
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1703.813941
  * On level 1 max(abs(diveu)) = 1154.780884
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.578916976
MLMG: Initial residual (resid0) = 3.578916976
MLMG: Iteration   1 Fine resid/bnorm = 0.0777085549
MLMG: Iteration   2 Fine resid/bnorm = 0.003220373299
MLMG: Iteration   3 Fine resid/bnorm = 0.0001624472221
MLMG: Iteration   4 Fine resid/bnorm = 8.950145753e-06
MLMG: Iteration   5 Fine resid/bnorm = 5.097867123e-07
MLMG: Iteration   6 Fine resid/bnorm = 2.968820519e-08
MLMG: Iteration   7 Fine resid/bnorm = 1.738025194e-09
MLMG: Iteration   8 Fine resid/bnorm = 1.020779152e-10
MLMG: Iteration   9 Fine resid/bnorm = 5.980130937e-12
MLMG: Iteration   9 Crse resid/bnorm = 3.359096808e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 2.140239213e-11, 5.980130937e-12
MLMG: Timers: Solve = 0.069992214 Iter = 0.06706876 Bottom = 0.013708032
 >> After projection
  * On level 0 max(abs(diveu)) = 2.748821093e-10
  * On level 1 max(abs(diveu)) = 3.282042196e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.422205574  1.422205574  1.047474069e-12
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.449630343  1.449630343  2.04979065e-12
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.867782749
  * On lev 1 max(abs(rhs)) = 4.449545874

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.449545874
MLMG: Initial residual (resid0) = 4.449545874
MLMG: Iteration   1 Fine resid/bnorm = 0.008410259944
MLMG: Iteration   2 Fine resid/bnorm = 0.0001137804835
MLMG: Iteration   3 Fine resid/bnorm = 1.701752451e-06
MLMG: Iteration   4 Fine resid/bnorm = 2.726492043e-08
MLMG: Iteration   5 Fine resid/bnorm = 7.593162687e-10
MLMG: Iteration   6 Fine resid/bnorm = 7.154783718e-11
MLMG: Iteration   7 Fine resid/bnorm = 7.01425662e-12
MLMG: Iteration   7 Crse resid/bnorm = 2.03476747e-10
MLMG: Iteration   8 Fine resid/bnorm = 7.019103425e-13
MLMG: Iteration   8 Crse resid/bnorm = 2.100177903e-11
MLMG: Iteration   9 Fine resid/bnorm = 7.103657408e-14
MLMG: Iteration   9 Crse resid/bnorm = 2.372435531e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 1.055626073e-11, 2.372435531e-12
MLMG: Timers: Solve = 0.17835727 Iter = 0.151607341 Bottom = 0.013378285
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.413131257  1.413131257  1.142969295e-12
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444629562  1.444629562  2.135240281e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.151996
  * On level 1 max(abs(diveu)) = 804.0916384
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.70324018
MLMG: Initial residual (resid0) = 2.70324018
MLMG: Iteration   1 Fine resid/bnorm = 0.02252886971
MLMG: Iteration   2 Fine resid/bnorm = 0.001270661134
MLMG: Iteration   3 Fine resid/bnorm = 5.506108536e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.662331205e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.35796187e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.183180132e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.897280011e-10
MLMG: Iteration   8 Fine resid/bnorm = 2.149486785e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.204807274e-12
MLMG: Iteration   9 Crse resid/bnorm = 6.481693561e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 3.256883433e-12, 1.204807274e-12
MLMG: Timers: Solve = 0.070233697 Iter = 0.068227801 Bottom = 0.015119358
 >> After projection
  * On level 0 max(abs(diveu)) = 4.956470125e-11
  * On level 1 max(abs(diveu)) = 6.001305946e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413491111  1.413491111  1.14719291e-12
   max(abs(gpx/gpy/gpz))  = 14.29688751  14.29688751  5.147828529e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.447074151  1.447074151  2.117107942e-12
   max(abs(gpx/gpy/gpz))  = 23.00094001  23.00094001  7.802403179e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1509727113
  * On lev 1 max(abs(rhs)) = 0.6927293804

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6927293804
MLMG: Initial residual (resid0) = 0.6927293804
MLMG: Iteration   1 Fine resid/bnorm = 0.001957330759
MLMG: Iteration   2 Fine resid/bnorm = 2.634605463e-05
MLMG: Iteration   3 Fine resid/bnorm = 4.183117731e-07
MLMG: Iteration   4 Fine resid/bnorm = 7.513982353e-09
MLMG: Iteration   5 Fine resid/bnorm = 2.401762448e-10
MLMG: Iteration   6 Fine resid/bnorm = 1.709144764e-11
MLMG: Iteration   7 Fine resid/bnorm = 1.329898258e-12
MLMG: Iteration   7 Crse resid/bnorm = 1.248743859e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.248537243e-13
MLMG: Iteration   8 Crse resid/bnorm = 1.20978634e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.193495226e-14
MLMG: Iteration   9 Crse resid/bnorm = 1.185788006e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 8.214301906e-13, 1.185788006e-12
MLMG: Timers: Solve = 0.173602433 Iter = 0.150951659 Bottom = 0.012232432
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411707841  1.411707841  1.090851938e-12
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.44368775  1.44368775  2.177820418e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.202413
  * On level 1 max(abs(diveu)) = 804.0916384
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.04626377
MLMG: Initial residual (resid0) = 3.04626377
MLMG: Iteration   1 Fine resid/bnorm = 0.02129426342
MLMG: Iteration   2 Fine resid/bnorm = 0.001099515853
MLMG: Iteration   3 Fine resid/bnorm = 4.676459208e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.237544358e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.175905992e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.50250646e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.673746578e-10
MLMG: Iteration   8 Fine resid/bnorm = 2.101970486e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.212610425e-12
MLMG: Iteration   9 Crse resid/bnorm = 5.268467341e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 3.693931206e-12, 1.212610425e-12
MLMG: Timers: Solve = 0.069912042 Iter = 0.067907307 Bottom = 0.014773249
 >> After projection
  * On level 0 max(abs(diveu)) = 5.407175741e-11
  * On level 1 max(abs(diveu)) = 6.450897575e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.41136956  1.41136956  1.093421538e-12
   max(abs(gpx/gpy/gpz))  = 13.64992201  13.64992201  5.820379428e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44488668  1.44488668  2.174874776e-12
   max(abs(gpx/gpy/gpz))  = 22.90394394  22.90394394  9.659400253e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.11766771
  * On lev 1 max(abs(rhs)) = 0.4624751242

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4624751242
MLMG: Initial residual (resid0) = 0.4624751242
MLMG: Iteration   1 Fine resid/bnorm = 0.0003032846781
MLMG: Iteration   2 Fine resid/bnorm = 2.684864529e-06
MLMG: Iteration   3 Fine resid/bnorm = 4.405791159e-08
MLMG: Iteration   4 Fine resid/bnorm = 2.522054274e-09
MLMG: Iteration   5 Fine resid/bnorm = 1.717465953e-10
MLMG: Iteration   6 Fine resid/bnorm = 1.35429138e-11
MLMG: Iteration   7 Fine resid/bnorm = 1.087015567e-12
MLMG: Iteration   7 Crse resid/bnorm = 8.780242541e-11
MLMG: Iteration   8 Fine resid/bnorm = 9.483727603e-14
MLMG: Iteration   8 Crse resid/bnorm = 8.909185354e-12
MLMG: Final Iter. 8 resid, resid/bnorm = 4.120276603e-12, 8.909185354e-12
MLMG: Timers: Solve = 0.154595077 Iter = 0.134280827 Bottom = 0.012058207
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410898546  1.410898546  1.090573157e-12
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443660869  1.443660869  2.224664172e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      2.029592028

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063119654 with dt = 0.004063119654

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1212.555318
  * On level 1 max(abs(diveu)) = 794.3420317
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.032387191
MLMG: Initial residual (resid0) = 3.032387191
MLMG: Iteration   1 Fine resid/bnorm = 0.0210142899
MLMG: Iteration   2 Fine resid/bnorm = 0.001083534242
MLMG: Iteration   3 Fine resid/bnorm = 4.569191824e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.213048942e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.18321974e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.534064668e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.685750817e-10
MLMG: Iteration   8 Fine resid/bnorm = 2.106034629e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.213642289e-12
MLMG: Iteration   9 Crse resid/bnorm = 5.198486059e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 3.680233333e-12, 1.213642289e-12
MLMG: Timers: Solve = 0.070317754 Iter = 0.068301723 Bottom = 0.014968212
 >> After projection
  * On level 0 max(abs(diveu)) = 5.337834456e-11
  * On level 1 max(abs(diveu)) = 6.416390859e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428759962  1.428759962  1.0514801e-12
   max(abs(gpx/gpy/gpz))  = 14.23448796  14.23448796  6.425454851e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.454205373  1.454205373  2.107989562e-12
   max(abs(gpx/gpy/gpz))  = 22.61989507  22.61989507  1.145193571e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736115617
  * On lev 1 max(abs(rhs)) = 4.278230169

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278230169
MLMG: Initial residual (resid0) = 4.278230169
MLMG: Iteration   1 Fine resid/bnorm = 0.007789121089
MLMG: Iteration   2 Fine resid/bnorm = 0.0001049841193
MLMG: Iteration   3 Fine resid/bnorm = 1.558883232e-06
MLMG: Iteration   4 Fine resid/bnorm = 2.545698549e-08
MLMG: Iteration   5 Fine resid/bnorm = 9.763891455e-10
MLMG: Iteration   6 Fine resid/bnorm = 9.090664699e-11
MLMG: Iteration   7 Fine resid/bnorm = 8.69812406e-12
MLMG: Iteration   7 Crse resid/bnorm = 3.785719262e-10
MLMG: Iteration   8 Fine resid/bnorm = 8.541013929e-13
MLMG: Iteration   8 Crse resid/bnorm = 3.753378765e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.527179057e-14
MLMG: Iteration   9 Crse resid/bnorm = 3.757491112e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 1.607541184e-11, 3.757491112e-12
MLMG: Timers: Solve = 0.17151339 Iter = 0.151768203 Bottom = 0.012976716
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424410448  1.424410448  4.577801851e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449945385  1.449945385  8.853334005e-13
   Time per fluid step      0.571627759
   Time per step        0.573333561
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063119654
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.585603275
Time spent in main      2.615195303

AMReX (26.11-3-g75c804923cd5) finalized