Initializing AMReX (26.11-5-g1d9bd90c3583)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
OMP initialized with 1 OMP threads
AMReX (26.11-5-g1d9bd90c3583) initialized
   MFIX git describe: 26.11-11-gbf4ab648cdd0
AMReX-Hydro git hash: 154572aa6cf22c35a69729c74a0276909b96d5e3
Number of levels: 1
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================


================================================================================
Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest
================================================================================


================================================================================
Warning: Overwriting amr.plot_int with value from output.plot.int
================================================================================


================================================================================
Warning: Overwriting amr.plot_file with value from output.plot.file
================================================================================

Simulation is transient

================================================================================
Warning: mfix.stop_time and mfix.max_step are both defined.
The simulation will end when either condition is met.
================================================================================


--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------

Scalar diffusion coefficients
Tracer0: 0
Particle-particle conduction is disabled.
Particle-fluid-particle conduction is disabled.
Specified constant pressure drop: (1000,0,0)

Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: ParticleRunTime


================================================================================
Warning: Regridding disabled for single level, single rank run.
================================================================================

Drag model: BVK2
Convection model not specified. Setting default:
  mfix.convection.model = RanzMarshall

 Building cylinder geometry.
 
 Internal Flow: 1
 Radius:    0.49
 Height:    -1
 Direction: 0
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 1.5, 1.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
Auto generating particles ...
Total number of generated particles: 2,578
Time spent in initializing particles 0.020482303


****************************************
  Coverage report:  Grids        Cells
          regular:      0           45
          covered:      0         1000
              cut:      1           80
****************************************

Clean up auto-generated particles.

  IC Region                Generated           Removed         Remaining
  ****************  ****************  ****************  ****************
  fluid-only                       0                 0                 0
  bed                          2,578             2,412               166
  ----------------  ----------------  ----------------  ----------------
  Total                        2,578             2,412               166
  ****************  ****************  ****************  ****************
On level 0: set volume fraction bcs
Setting original sum_vol to 0.6458114754
On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 0 fillpatch tracer
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0  1.301306859  1.301322376
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 0.4566552806  0.6312808674  0.6265463052
Doing initial pressure iterations with dt = 0.006801935471
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 0
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410863973
MLMG: Initial rhs               = 1.829045041
MLMG: Initial residual (resid0) = 1.829045041
MLMG: Final Iter. 12 resid, resid/bnorm = 3.651523528e-13, 1.996409846e-13
MLMG: Timers: Solve = 0.003282936 Iter = 0.003167796 Bottom = 0.00280425
 >> After projection
  * On level 0 max(abs(diveu)) = 6.010792039e-13
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.184945709  0.6154358138  0.6160514722
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.505150072  0.6802962504  0.7230842277
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410863973
MLMG: Initial rhs               = 1.829045041
MLMG: Initial residual (resid0) = 1.829045041
MLMG: Final Iter. 12 resid, resid/bnorm = 3.651523528e-13, 1.996409846e-13
MLMG: Timers: Solve = 0.003306878 Iter = 0.003232453 Bottom = 0.002844307
 >> After projection
  * On level 0 max(abs(diveu)) = 6.010792039e-13
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.437238136  0.679743374  0.7230842277
   max(abs(gpx/gpy/gpz))  = 246.1411605  37.27088479  35.80638389
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.363667008  0.6780910123  0.7520111736
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410863973
MLMG: Initial rhs               = 1.829045041
MLMG: Initial residual (resid0) = 1.829045041
MLMG: Final Iter. 12 resid, resid/bnorm = 3.651523528e-13, 1.996409846e-13
MLMG: Timers: Solve = 0.003256758 Iter = 0.003181531 Bottom = 0.002815726
 >> After projection
  * On level 0 max(abs(diveu)) = 6.010792039e-13
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.369044917  0.6781050972  0.7520111736
   max(abs(gpx/gpy/gpz))  = 297.5815116  52.4708222  51.79190047
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.34583765  0.6737511576  0.7674552215
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
Enclosed domain volume is   0.6458114754
Time spent in init      0.086275137

  Writing plotfile TracerAdv_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 1: from old_time 0 to new time 0.005962446907 with dt = 0.005962446907

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410863973
MLMG: Initial rhs               = 1.829045041
MLMG: Initial residual (resid0) = 1.829045041
MLMG: Final Iter. 12 resid, resid/bnorm = 3.651523528e-13, 1.996409846e-13
MLMG: Timers: Solve = 0.003259329 Iter = 0.003179221 Bottom = 0.00281184
 >> After projection
  * On level 0 max(abs(diveu)) = 6.010792039e-13
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.355219238  0.6169908755  0.6173467348
   max(abs(gpx/gpy/gpz))  = 314.2945375  58.30970706  58.34251449
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.730552196  0.6352883561  0.671806147
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.40900647
MLMG: Initial rhs               = 3.348065519
MLMG: Initial residual (resid0) = 3.348065519
MLMG: Final Iter. 11 resid, resid/bnorm = 2.653877118e-12, 7.926598517e-13
MLMG: Timers: Solve = 0.003009803 Iter = 0.002933586 Bottom = 0.002597465
 >> After projection
  * On level 0 max(abs(diveu)) = 4.368817808e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.265188326  0.6123317188  0.6108593372
   max(abs(gpx/gpy/gpz))  = 287.2771842  45.9958409  45.04886157
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.489101634  0.6326148997  0.6749394813
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.005962446907
done. 
   Time per fluid step      0.030748319
   Time per 1 particle steps 9.6349e-05
   Coupling time per step   0.002651197
Sum tracer volume wgt = 157.3383503 141.9494744
   Time per step        0.034119761

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 2: from old_time 0.005962446907 to new time 0.01132074478 with dt = 0.005358297871

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.516974243
MLMG: Initial rhs               = 3.457819743
MLMG: Initial residual (resid0) = 3.457819743
MLMG: Final Iter. 11 resid, resid/bnorm = 2.199351812e-12, 6.360516091e-13
MLMG: Timers: Solve = 0.003022664 Iter = 0.002948146 Bottom = 0.002608895
 >> After projection
  * On level 0 max(abs(diveu)) = 3.600447365e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.78296602  0.6224290726  0.6664769684
   max(abs(gpx/gpy/gpz))  = 319.744028  48.7025239  47.52115549
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.67152367  0.6559866315  0.7852527531
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 11.3734774
MLMG: Initial rhs               = 6.811362993
MLMG: Initial residual (resid0) = 6.811362993
MLMG: Final Iter. 11 resid, resid/bnorm = 3.560951598e-12, 5.227957461e-13
MLMG: Timers: Solve = 0.003007931 Iter = 0.002931412 Bottom = 0.002595768
 >> After projection
  * On level 0 max(abs(diveu)) = 4.803695145e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.60361502  0.6205931924  0.6564124637
   max(abs(gpx/gpy/gpz))  = 447.8673673  73.70891126  76.14212531
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.43633882  0.6522293742  0.7803885757
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.005358297871
done. 
   Time per fluid step      0.029599704
   Time per 1 particle steps 4.6828e-05
   Coupling time per step   0.002613561
Sum tracer volume wgt = 157.7057381 141.9494744
   Time per step        0.032975248

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 3: from old_time 0.01132074478 to new time 0.01593911583 with dt = 0.004618371053

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 11.13345279
MLMG: Initial rhs               = 6.687600332
MLMG: Initial residual (resid0) = 6.687600332
MLMG: Final Iter. 11 resid, resid/bnorm = 3.326946207e-12, 4.974798197e-13
MLMG: Timers: Solve = 0.002989927 Iter = 0.002915034 Bottom = 0.002578172
 >> After projection
  * On level 0 max(abs(diveu)) = 4.929771807e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.79719284  0.6457645697  0.7671576082
   max(abs(gpx/gpy/gpz))  = 505.2880878  81.58880359  86.29309599
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.71960223  0.812147381  0.9177795206
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 18.25424011
MLMG: Initial rhs               = 12.08347498
MLMG: Initial residual (resid0) = 12.08347498
MLMG: Final Iter. 11 resid, resid/bnorm = 4.065192627e-12, 3.364257909e-13
MLMG: Timers: Solve = 0.002994821 Iter = 0.002919322 Bottom = 0.002585781
 >> After projection
  * On level 0 max(abs(diveu)) = 6.650108203e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.60735406  0.6458436626  0.7537386237
   max(abs(gpx/gpy/gpz))  = 613.8423865  102.8095485  113.026347
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.52538972  0.7978878292  0.9093163657
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.004618371053
done. 
   Time per fluid step      0.029350159
   Time per 1 particle steps 4.5719e-05
   Coupling time per step   0.002623351
Sum tracer volume wgt = 158.2474106 141.9494744
   Time per step        0.032715324

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 4: from old_time 0.01593911583 to new time 0.02005182372 with dt = 0.004112707893

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 18.06071365
MLMG: Initial rhs               = 11.83103789
MLMG: Initial residual (resid0) = 11.83103789
MLMG: Final Iter. 11 resid, resid/bnorm = 5.129008329e-12, 4.335214185e-13
MLMG: Timers: Solve = 0.002998343 Iter = 0.002924797 Bottom = 0.002589896
 >> After projection
  * On level 0 max(abs(diveu)) = 8.426801449e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.05946002  0.7138301033  0.8863022451
   max(abs(gpx/gpy/gpz))  = 662.8806345  109.1453982  122.1614816
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.87310352  0.9907425819  1.076417877
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 25.85305198
MLMG: Initial rhs               = 15.47761251
MLMG: Initial residual (resid0) = 15.47761251
MLMG: Final Iter. 11 resid, resid/bnorm = 5.845268714e-12, 3.776595848e-13
MLMG: Timers: Solve = 0.002977623 Iter = 0.002901088 Bottom = 0.002569118
 >> After projection
  * On level 0 max(abs(diveu)) = 9.628306233e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 17.8528996  0.7127810724  0.866553332
   max(abs(gpx/gpy/gpz))  = 746.2937905  124.9443693  143.6611854
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.68663378  0.9737898174  1.053285447
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.004112707893
done. 
   Time per fluid step      0.029281472
   Time per 1 particle steps 4.6495e-05
   Coupling time per step   0.002500406
Sum tracer volume wgt = 158.9236018 141.9494744
   Time per step        0.032519337

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 5: from old_time 0.02005182372 to new time 0.02382720953 with dt = 0.003775385803

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 25.45864916
MLMG: Initial rhs               = 15.22886873
MLMG: Initial residual (resid0) = 15.22886873
MLMG: Final Iter. 11 resid, resid/bnorm = 4.498457162e-12, 2.95390107e-13
MLMG: Timers: Solve = 0.002994358 Iter = 0.002918953 Bottom = 0.002586104
 >> After projection
  * On level 0 max(abs(diveu)) = 7.403082188e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 20.77244543  0.8342893795  1.000921113
   max(abs(gpx/gpy/gpz))  = 785.3651436  129.3570906  150.7040769
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.32989269  1.154292622  1.228972049
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 32.0617067
MLMG: Initial rhs               = 17.72534736
MLMG: Initial residual (resid0) = 17.72534736
MLMG: Final Iter. 11 resid, resid/bnorm = 5.916156454e-12, 3.337681532e-13
MLMG: Timers: Solve = 0.003131668 Iter = 0.003055131 Bottom = 0.002695078
 >> After projection
  * On level 0 max(abs(diveu)) = 9.739857935e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 20.55219377  0.8339462979  0.9782893787
   max(abs(gpx/gpy/gpz))  = 859.371278  140.6517732  167.1460979
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.15884043  1.126348253  1.196656677
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.003775385803
done. 
   Time per fluid step      0.029160796
   Time per 1 particle steps 4.6397e-05
   Coupling time per step   0.002600284
Sum tracer volume wgt = 159.6715336 141.9494744
   Time per step        0.032435399

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 6: from old_time 0.02382720953 to new time 0.02736738069 with dt = 0.003540171166

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 31.62362572
MLMG: Initial rhs               = 17.62213186
MLMG: Initial residual (resid0) = 17.62213186
MLMG: Final Iter. 11 resid, resid/bnorm = 5.867639707e-12, 3.329699127e-13
MLMG: Timers: Solve = 0.003068093 Iter = 0.002993957 Bottom = 0.002646591
 >> After projection
  * On level 0 max(abs(diveu)) = 9.665490134e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 23.06932226  0.9237259206  1.106678411
   max(abs(gpx/gpy/gpz))  = 894.5835613  143.478833  171.8582525
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.26492224  1.274496276  1.34168686
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 37.12059763
MLMG: Initial rhs               = 19.39818598
MLMG: Initial residual (resid0) = 19.39818598
MLMG: Final Iter. 11 resid, resid/bnorm = 4.475309012e-12, 2.307076042e-13
MLMG: Timers: Solve = 0.002975584 Iter = 0.00290354 Bottom = 0.002569507
 >> After projection
  * On level 0 max(abs(diveu)) = 7.383328241e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 22.84279388  0.923512534  1.082368298
   max(abs(gpx/gpy/gpz))  = 954.6609115  151.187252  183.3355777
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.1169379  1.243850855  1.306654839
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.003540171166
done. 
   Time per fluid step      0.028872333
   Time per 1 particle steps 4.6257e-05
   Coupling time per step   0.002743382
Sum tracer volume wgt = 160.4233412 141.9494744
   Time per step        0.032397387

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 7: from old_time 0.02736738069 to new time 0.03073660923 with dt = 0.003369228532

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 36.56549997
MLMG: Initial rhs               = 19.3471013
MLMG: Initial residual (resid0) = 19.3471013
MLMG: Final Iter. 11 resid, resid/bnorm = 4.54702942e-12, 2.350238079e-13
MLMG: Timers: Solve = 0.002977933 Iter = 0.002901523 Bottom = 0.002569925
 >> After projection
  * On level 0 max(abs(diveu)) = 7.483259974e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 25.04311015  1.0432143  1.20558591
   max(abs(gpx/gpy/gpz))  = 983.9604542  153.1018428  186.300363
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 24.81071328  1.323769548  1.428914078
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 40.95413688
MLMG: Initial rhs               = 20.65731683
MLMG: Initial residual (resid0) = 20.65731683
MLMG: Final Iter. 11 resid, resid/bnorm = 4.9038551e-12, 2.373907095e-13
MLMG: Timers: Solve = 0.002986078 Iter = 0.002910685 Bottom = 0.002574053
 >> After projection
  * On level 0 max(abs(diveu)) = 8.087498357e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 24.81096409  1.023321288  1.180574994
   max(abs(gpx/gpy/gpz))  = 1032.861354  158.6211883  193.4777291
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 24.6836956  1.29388057  1.412563798
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.003369228532
done. 
   Time per fluid step      0.028819789
   Time per 1 particle steps 4.494e-05
   Coupling time per step   0.002533257
Sum tracer volume wgt = 161.1104389 141.9494744
   Time per step        0.032006826

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 8: from old_time 0.03073660923 to new time 0.03397824705 with dt = 0.003241637824

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 40.45102484
MLMG: Initial rhs               = 20.62270849
MLMG: Initial residual (resid0) = 20.62270849
MLMG: Final Iter. 11 resid, resid/bnorm = 4.948819132e-12, 2.399694073e-13
MLMG: Timers: Solve = 0.003004404 Iter = 0.002928509 Bottom = 0.002591958
 >> After projection
  * On level 0 max(abs(diveu)) = 8.136302226e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 26.73949178  1.102619114  1.301063202
   max(abs(gpx/gpy/gpz))  = 1057.404102  159.7904784  196.0175688
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 26.22908263  1.31623658  1.545166394
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 43.9493693
MLMG: Initial rhs               = 21.51699779
MLMG: Initial residual (resid0) = 21.51699779
MLMG: Final Iter. 11 resid, resid/bnorm = 4.038436252e-12, 1.876858608e-13
MLMG: Timers: Solve = 0.003001534 Iter = 0.002920993 Bottom = 0.002586488
 >> After projection
  * On level 0 max(abs(diveu)) = 6.156259525e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 26.50428945  1.086013719  1.276299343
   max(abs(gpx/gpy/gpz))  = 1097.671323  163.2377397  207.1672229
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.97350761  1.28993065  1.525108724
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.003241637824
done. 
   Time per fluid step      0.029309288
   Time per 1 particle steps 4.6095e-05
   Coupling time per step   0.00275454
Sum tracer volume wgt = 161.6874338 141.9494744
   Time per step        0.032692332

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 9: from old_time 0.03397824705 to new time 0.03712119133 with dt = 0.003142944282

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 43.5236573
MLMG: Initial rhs               = 21.51764867
MLMG: Initial residual (resid0) = 21.51764867
MLMG: Final Iter. 11 resid, resid/bnorm = 3.740285859e-12, 1.738240974e-13
MLMG: Timers: Solve = 0.002973647 Iter = 0.002896613 Bottom = 0.002565314
 >> After projection
  * On level 0 max(abs(diveu)) = 5.69494676e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 28.1966337  1.111573998  1.392794717
   max(abs(gpx/gpy/gpz))  = 1118.545899  163.8187293  212.5950488
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.6274833  1.283900573  1.646554582
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 46.38681185
MLMG: Initial rhs               = 21.80752831
MLMG: Initial residual (resid0) = 21.80752831
MLMG: Final Iter. 11 resid, resid/bnorm = 1.096842062e-11, 5.029648687e-13
MLMG: Timers: Solve = 0.002994481 Iter = 0.002917965 Bottom = 0.002581775
 >> After projection
  * On level 0 max(abs(diveu)) = 1.677342511e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.95835551  1.098664144  1.368628476
   max(abs(gpx/gpy/gpz))  = 1152.060764  165.4132503  222.1021509
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.37942773  1.267992172  1.627510607
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.003142944282
done. 
   Time per fluid step      0.029603753
   Time per 1 particle steps 4.5335e-05
   Coupling time per step   0.0027374
Sum tracer volume wgt = 162.1030395 141.9494744
   Time per step        0.033024795

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 10: from old_time 0.03712119133 to new time 0.04015795997 with dt = 0.00303676864

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 46.00374731
MLMG: Initial rhs               = 21.76637235
MLMG: Initial residual (resid0) = 21.76637235
MLMG: Final Iter. 11 resid, resid/bnorm = 1.065181277e-11, 4.893701437e-13
MLMG: Timers: Solve = 0.003024152 Iter = 0.002948296 Bottom = 0.002611391
 >> After projection
  * On level 0 max(abs(diveu)) = 1.62923584e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 29.44385473  1.083017162  1.47755277
   max(abs(gpx/gpy/gpz))  = 1169.938107  165.4594222  226.3307677
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.84151913  1.256009803  1.736666819
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 48.38050627
MLMG: Initial rhs               = 21.55615044
MLMG: Initial residual (resid0) = 21.55615044
MLMG: Final Iter. 11 resid, resid/bnorm = 1.088823293e-11, 5.05110268e-13
MLMG: Timers: Solve = 0.002996592 Iter = 0.002918774 Bottom = 0.002583638
 >> After projection
  * On level 0 max(abs(diveu)) = 1.658401962e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 29.20702406  1.074124481  1.454152596
   max(abs(gpx/gpy/gpz))  = 1198.89302  171.801954  233.9884967
Min and Max of epf 0.7033339221 1
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.59859839  1.243157349  1.717591225
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.00303676864
done. 
   Time per fluid step      0.029105342
   Time per 1 particle steps 4.5441e-05
   Coupling time per step   0.002895638
Sum tracer volume wgt = 162.336409 141.9494744
   Time per step        0.03267827
  Writing plotfile TracerAdv_plt00010 at time 0.04015795997
Time spent in main (after init) 0.334621974
Time spent in main      0.420897111

AMReX (26.11-5-g1d9bd90c3583) finalized