[main]
testTopDir     = /scratch/AMReX_RegTesting/rt-ERF/
webTopDir      = /scratch/AMReX_RegTesting/rt-ERF/web

useCmake = 0

sourceTree = C_Src

plot_file_name = erf.plot_file_1
check_file_name = erf.check_file

# suiteName is the name prepended to all output directories
suiteName = ERF

COMP = g++
FCOMP = gfortran
add_to_c_make_command = TEST=TRUE USE_ASSERTION=TRUE

purge_output = 1

MAKE = make
numMakeJobs = 8

# MPIcommand should use the placeholders:
#   @host@ to indicate where to put the hostname to run on
#   @nprocs@ to indicate where to put the number of processors
#   @command@ to indicate where to put the command to run
#
# only tests with useMPI = 1 will run in parallel
# nprocs is problem dependent and specified in the individual problem
# sections.

#MPIcommand = mpiexec -host @host@ -n @nprocs@ @command@
MPIcommand = mpiexec -n @nprocs@ @command@
MPIhost = 

reportActiveTestsOnly = 1

# Add "GO UP" link at the top of the web page?
goUpLink = 1

# email
sendEmailWhenFail = 1
emailTo = asalmgren@lbl.gov, amlattanzi@lbl.gov
emailBody = Check https://ccse.lbl.gov/pub/RegressionTesting2/ERF/

[AMReX]
dir = /scratch/AMReX_RegTesting/amrex
branch = development

[source]
dir = /scratch/AMReX_RegTesting/ERF
branch = development

# individual problems follow

[ABL-Smag] 
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_smagorinsky
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None erf.fixed_mri_dt_ratio=4 amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-Smag-OMP] 
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_smagorinsky
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
runtime_params = max_step=50 fabarray.mfiter_tile_size = 1024 8 8 erf.terrain_type=None erf.fixed_mri_dt_ratio=4 amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-Deardorff] 
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_deardorff
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None erf.fixed_mri_dt_ratio=4 amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-Deardorff-OMP]
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_deardorff
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 erf.terrain_type=None fabarray.mfiter_tile_size=1024 8 8 erf.fixed_mri_dt_ratio=4 amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-11
abs_tolerance= 1.e-11
fcompareOpts = -a

[ABL-Deardorff-GABLS]
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_GABLS1_deardorff
aux1File = CanonicalTests/ABL/input_sounding_GABLS1
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=10 amr.n_cell= 64 64 64 amrex.fpe_trap_invalid=1 prob.T_0_Pert_Mag=0.0 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-MOST] 
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_most
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=10 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None erf.fixed_mri_dt_ratio=4 amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-MOST-OMP] 
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_most
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
runtime_params = max_step=10 fabarray.mfiter_tile_size=1024 8 8 erf.terrain_type=None erf.fixed_mri_dt_ratio=4 amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-MRF]
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_GABLS1_mynn25
aux1File = CanonicalTests/ABL/input_sounding_GABLS1
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 erf.terrain_type=None erf.pbl_type=MRF amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-MYJ]
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_GABLS1_mynn25
aux1File = CanonicalTests/ABL/input_sounding_GABLS1
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 erf.terrain_type=None erf.pbl_type=MYJ amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-MYNN]
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_GABLS1_mynn25
aux1File = CanonicalTests/ABL/input_sounding_GABLS1
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 erf.terrain_type=None amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-SHOC-1p5]
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_GABLS1_mynn25
aux1File = CanonicalTests/ABL/input_sounding_GABLS1
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 erf.terrain_type=None erf.pbl_type=NATIVE_SHOC erf.shoc.transport_mode=state_update erf.shoc.momentum_transport=state_update erf.shoc.signed_tke_production=true erf.shoc.extra_shoc_diags=true erf.shoc.shoc_1p5tke=true amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[ABL-SHOC-HO]
buildDir = Exec
inputFile = CanonicalTests/ABL/inputs_GABLS1_mynn25
aux1File = CanonicalTests/ABL/input_sounding_GABLS1
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 erf.terrain_type=None erf.pbl_type=NATIVE_SHOC erf.shoc.transport_mode=state_update erf.shoc.momentum_transport=state_update erf.shoc.signed_tke_production=true erf.shoc.extra_shoc_diags=true erf.shoc.shoc_1p5tke=false amrex.fpe_trap_invalid=1 erf.deterministic_ic_pert=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[Bomex]
addToCompileString =
buildDir = Exec
inputFile = CanonicalTests/Bomex/inputs_bomex
aux1File = CanonicalTests/Bomex/input_sounding
link1File= CanonicalTests/Bomex/chk00000_for_restart
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=20 erf.moisture_model="Kessler_NoRain" erf.terrain_type=None erf.restart=chk00000_for_restart amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[Bubble_Morrison]
addToCompileString =
buildDir = Exec/
inputFile = RegTests/Bubble/inputs_BF02_moist_bubble
aux1File = RegTests/Bubble/input_sounding_squall2d
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 erf.moisture_model="Morrison" erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[Bubble_SAM]
addToCompileString =
buildDir = Exec
inputFile = RegTests/Bubble/inputs_BF02_moist_bubble
aux1File = RegTests/Bubble/input_sounding_squall2d
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=20 erf.moisture_model="SAM" erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[Bubble_Kessler_NoRain]
addToCompileString =
buildDir = Exec
inputFile = RegTests/Bubble/inputs_BF02_moist_bubble
aux1File = RegTests/Bubble/input_sounding_squall2d
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=20 erf.moisture_model="Kessler_NoRain" erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[Bubble_Kessler]
addToCompileString =
buildDir = Exec
inputFile = RegTests/Bubble/inputs_BF02_moist_bubble
aux1File = RegTests/Bubble/input_sounding_squall2d
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=20 erf.moisture_model="Kessler" geometry.prob_extent=10000.0 400.0 10000.0 amr.n_cell=100 4 100 xlo.type="Outflow" xhi.type="Outflow" prob.x_c=5000.0 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[Bubble_WDM6]
addToCompileString =
buildDir = Exec/
inputFile = RegTests/Bubble/inputs_BF02_moist_bubble
aux1File = RegTests/Bubble/input_sounding_squall2d
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 erf.moisture_model="WDM6" erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[Bubble_WSM6]
addToCompileString =
buildDir = Exec/
inputFile = RegTests/Bubble/inputs_BF02_moist_bubble
aux1File = RegTests/Bubble/input_sounding_squall2d
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 erf.moisture_model="WSM6" erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[DensityCurrent] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_crse_halfdomain
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 amr.max_grid_size_x=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12

[DensityCurrent_ml] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_amr
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=450 amr.max_grid_size_x=8 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[DensityCurrent_Terrain] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_crse_halfdomain_zlev
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 amr.max_grid_size_x=8 amr.max_grid_size_y=8 amr.n_cell = 256 4 64 erf.terrain_type=StaticFittedMesh geometry.prob_lo=0. 0. 0. geometry.prob_hi=25600. 400. 6400. amrex.fpe_trap_invalid=1
tolerance= 1.e-12

[DensityCurrent_anelastic]
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_crse_halfdomain
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 erf.anelastic=1 erf.terrain_type=None erf.poisson_reltol=1.e-10 erf.poisson_abstol=1.e-10 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
fcompareOpts =

[DensityCurrent_ml_anelastic] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_amr
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=450 erf.anelastic=1 erf.terrain_type=None erf.poisson_reltol=1.e-10 erf.poisson_abstol=1.e-10 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[DensityCurrent_ml_hybrid] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_hybrid
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=450 erf.poisson_reltol=1.e-10 erf.poisson_abstol=1.e-10 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[DensityCurrent_ml_hybrid_zlev] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_hybrid_zlev
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=450 erf.poisson_reltol=1.e-10 erf.poisson_abstol=1.e-10 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[DensityCurrent_detJ2] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_crse_halfdomain_zlev
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 amr.max_grid_size_x=8 amr.max_grid_size_y=8 amr.n_cell = 256 4 64 geometry.prob_lo=0. 0. 0. geometry.prob_hi=25600. 400. 3200. erf.terrain_type=StaticFittedMesh amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[DensityCurrent-OMP] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_crse_halfdomain
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
runtime_params = max_step=100 amr.n_cell = 256 4 64 fabarray.mfiter_tile_size = 1024 8 8 erf.terrain_type=None geometry.prob_lo=0. 0. 0. geometry.prob_hi=25600. 400. 6400. amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[DensityCurrent_Terrain-OMP] 
addToCompileString = USE_FFT=TRUE
buildDir = Exec
inputFile = CanonicalTests/DensityCurrent/inputs_crse_halfdomain
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
runtime_params = max_step=100 amr.n_cell = 256 4 64 fabarray.mfiter_tile_size=1024 8 8 erf.terrain_type=StaticFittedMesh geometry.prob_lo=0. 0. 0. geometry.prob_hi=25600. 400. 6400. amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ImmersedForcing_Building] 
buildDir = Exec
inputFile = RegTests/ImmersedForcingTest/inputs_if_building
aux1File = RegTests/ImmersedForcingTest/skyscraper_5m_128x128.txt
aux2File = RegTests/ImmersedForcingTest/input_sounding_CBL
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=10 amr.max_grid_size_x=64 amr.max_grid_size_y=64 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ImmersedForcing_Terrain] 
buildDir = Exec
inputFile = RegTests/ImmersedForcingTest/inputs_if_terrain
aux1File = RegTests/ImmersedForcingTest/WoA_dx5m_h100m_128x128.txt
aux2File = RegTests/ImmersedForcingTest/input_sounding_CBL
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=10 amr.max_grid_size_x=64 amr.max_grid_size_y=64 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[IsentropicVortexStationary] 
buildDir = Exec
inputFile = RegTests/IsentropicVortex/inputs_stationary
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[IsentropicVortexAdvecting] 
buildDir = Exec
inputFile = RegTests/IsentropicVortex/inputs_advecting
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=20 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ScalarAdvecUniformU] 
buildDir = Exec
inputFile = RegTests/ScalarAdvDiff/inputs_advect_uniformU
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ScalarAdvecShearedU] 
buildDir = Exec
inputFile = RegTests/ScalarAdvDiff/inputs_advect_shearU
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8  erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ScalarAdvecShearedU_anelastic] 
buildDir = Exec
inputFile = RegTests/ScalarAdvDiff/inputs_advect_shearU
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8  erf.terrain_type=None erf.anelastic=1 amrex.fpe_trap_invalid=1
fcompareOpts =

[ScalarAdvecDiffUniformU] 
buildDir = Exec
inputFile = RegTests/ScalarAdvDiff/inputs_adv_diff_uniformU
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ScalarAdvDiffInflowOutflow] 
buildDir = Exec
inputFile = RegTests/ScalarAdvDiff/inputs_advdiffinflowoutflow
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 amr.max_grid_size_x=8 amr.max_grid_size_y=8  erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ScalarAdvecDiffDoubleDen] 
buildDir = Exec
inputFile = RegTests/ScalarAdvDiff/inputs_adv_diff_uniformU
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.rho0_trans=2.0 prob.rho_0=2.0 erf.plot_vars_1=x_velocity y_velocity z_velocity theta scalar erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ScalarDiffusion] 
buildDir = Exec
inputFile = RegTests/ScalarAdvDiff/inputs_diffuse_gaussian
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[ScalarDiffusionSine]
buildDir = Exec
inputFile = RegTests/ScalarAdvDiff/inputs_diffuse_sine
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[EkmanSpiral_custom] 
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
buildDir = Exec
inputFile = CanonicalTests/EkmanSpiral/inputs_custom
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.n_cell=4 4 400 geometry.prob_extent=50. 50. 5000. erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[EkmanSpiral_ideal] 
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
buildDir = Exec
inputFile = CanonicalTests/EkmanSpiral/inputs_ideal
aux1File = CanonicalTests/EkmanSpiral/wrfinput_ekman_d01
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=1 erf.terrain_type=StaticFittedMesh erf.init_type=WRFInput erf.moisture_model=SatAdj erf.avg_grid_faces_to_nodes=true amrex.fpe_trap_invalid=1
tolerance= 1.e-12

[EkmanSpiral_input_sounding] 
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
buildDir = Exec
inputFile = CanonicalTests/EkmanSpiral/inputs_input_sounding
aux1File = CanonicalTests/EkmanSpiral/input_sounding_file
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=10  erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[EkmanSpiral_custom_restart]
buildDir = Exec
inputFile = CanonicalTests/EkmanSpiral/inputs_custom
target = ERF
dim = 3
restartTest = 1
restartFileNum = 25
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12

[EkmanSpiral_ideal_restart]
buildDir = Exec
inputFile = CanonicalTests/EkmanSpiral/inputs_ideal
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
aux1File = CanonicalTests/EkmanSpiral/wrfinput_ekman_d01
target = ERF
dim = 3
restartTest = 1
restartFileNum = 25
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=StaticFittedMesh erf.avg_grid_faces_to_nodes=true amrex.fpe_trap_invalid=1
tolerance= 1.e-12

[EkmanSpiral_sounding_restart]
buildDir = Exec
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
inputFile = CanonicalTests/EkmanSpiral/inputs_input_sounding
aux1File = CanonicalTests/EkmanSpiral/input_sounding_file
target = ERF
dim = 3
restartTest = 1
restartFileNum = 25
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None amrex.fpe_trap_invalid=1
tolerance= 1.e-12

[MetGrid]
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
buildDir = Exec
inputFile = RegTests/MetGrid/inputs_metgrid
aux1File = RegTests/MetGrid/met_em.d01.2022-06-18_00_00_00.nc
aux2File = RegTests/MetGrid/met_em.d01.2022-06-18_06_00_00.nc
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=1 erf.moisture_model="Kessler" erf.terrain_type=StaticFittedMesh erf.plot_vars_1=density x_velocity y_velocity z_velocity theta scalar pres_hse dens_hse pert_pres pert_dens erf.fixed_mri_dt_ratio=2 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[MetGrid_restart]
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
buildDir = Exec
inputFile = RegTests/MetGrid/inputs_metgrid
aux1File = RegTests/MetGrid/met_em.d01.2022-06-18_00_00_00.nc
aux2File = RegTests/MetGrid/met_em.d01.2022-06-18_06_00_00.nc
target = ERF
dim = 3
restartTest = 1
restartFileNum = 1
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=2 erf.moisture_model="Kessler" erf.terrain_type=StaticFittedMesh erf.plot_vars_1=density x_velocity y_velocity z_velocity theta scalar pres_hse dens_hse pert_pres pert_dens erf.fixed_mri_dt_ratio=2 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[MovingTerrain_nosub] 
addToCompileString = COMPUTE_ERROR=TRUE
buildDir = Exec
inputFile = RegTests/MovingTerrain/inputs
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 erf.substepping_type=None erf.fixed_dt=0.005 erf.terrain_type=Moving amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-14

[NoahMP_Ideal] 
addToCompileString = USE_NOAHMP=TRUE
buildDir = Exec
inputFile = RegTests/NoahMP_Ideal/inputs_noahmp_ideal
aux1File =  RegTests/NoahMP_Ideal/input_sounding
aux2File =  RegTests/NoahMP_Ideal/namelist.erf
aux3File =  RegTests/NoahMP_Ideal/NoahmpTable.TBL
aux4File =  RegTests/NoahMP_Ideal/wrfinput_d01
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=2 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-14

[ParticlesOverWoA]
addToCompileString = USE_PARTICLES=TRUE
buildDir = Exec
inputFile = RegTests/ParticleTests/inputs_over_hill
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = tracer_particles.place_randomly_in_cells=true erf.plot_vars_1=density x_velocity y_velocity z_velocity theta scalar pres_hse dens_hse pert_pres pert_dens dpdx dpdy tracer_particles_mass_density amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
compareParticles = 1
particleTypes = tracer_particles
particle_tolerance= 1.e-12
particle_abs_tolerance= 1.e-12

[SDM_Congestus3D]
addToCompileString = USE_PARTICLES=TRUE
buildDir = Exec
inputFile = ../Tests/test_files/SDM_Congestus3D/SDM_Congestus3D.i
aux1File  = ../Tests/test_files/SDM_Congestus3D/input_sounding
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
tolerance= 1.e-12
abs_tolerance= 1.e-12
compareParticles = 0
runtime_params = amrex.fpe_trap_invalid=1

[SDM_MultiSpecies_Bubble2D]
addToCompileString = USE_PARTICLES=TRUE
buildDir = Exec
inputFile = ../Tests/test_files/SDM_MultiSpecies_Bubble2D/SDM_MultiSpecies_Bubble2D.i
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
tolerance= 1.e-12
abs_tolerance= 1.e-12
compareParticles = 0
runtime_params = amrex.fpe_trap_invalid=1

[SDM_RICO3D]
addToCompileString = USE_PARTICLES=TRUE
buildDir = Exec
inputFile = ../Tests/test_files/SDM_RICO3D/SDM_RICO3D.i
aux1File  = ../Tests/test_files/SDM_RICO3D/input_sounding
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params =  amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
compareParticles = 0
runtime_params = amrex.fpe_trap_invalid=1

[SDM_SineMassFlux]
addToCompileString = USE_PARTICLES=TRUE
buildDir = Exec
inputFile = ../Tests/test_files/SDM_SineMassFlux/SDM_SineMassFlux.i
aux1File  = ../Tests/test_files/SDM_SineMassFlux/input_sounding
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params =  amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12
compareParticles = 0
runtime_params = amrex.fpe_trap_invalid=1

[TaylorGreenAdvecting] 
buildDir = Exec
inputFile = RegTests/TaylorGreenVortex/inputs_advonly
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.terrain_type=None erf.fixed_mri_dt_ratio=2 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
fcompareOpts =

[TaylorGreenAdvDiffDoubleDen] 
buildDir = Exec
inputFile = RegTests/TaylorGreenVortex/inputs_advdiff
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=50 amr.max_grid_size_x=8 amr.max_grid_size_y=8 prob.rho_0=2.0 erf.dynamic_viscosity=12.5e-4 erf.plot_vars_1=x_velocity y_velocity z_velocity temp  erf.terrain_type=None erf.fixed_mri_dt_ratio=2 amrex.fpe_trap_invalid=1
tolerance= 1.e-10
fcompareOpts =

[TurbulentInflow]
buildDir = Exec
inputFile = RegTests/TurbulentInflow/compressible_source_inputs
link1File = RegTests/TurbulentInflow/chk_for_restart_comp
aux1File  = RegTests/TurbulentInflow/input_ReTau395Ana_sounding.txt
aux2File  = RegTests/TurbulentInflow/input_ReTau395Ana_inflow.txt
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = erf.fix_random_seed=1 erf.restart=chk_for_restart_comp max_step=10 erf.terrain_type=None erf.molec_diff_type=Constant erf.dynamic_viscosity=0.001 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[TurbulentInflow_anelastic]
addToCompileString = 
buildDir = Exec
inputFile = RegTests/TurbulentInflow/compressible_source_inputs
link1File = RegTests/TurbulentInflow/chk_for_restart_anel
aux1File  = RegTests/TurbulentInflow/input_ReTau395Ana_sounding.txt
aux2File  = RegTests/TurbulentInflow/input_ReTau395Ana_inflow.txt
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = erf.fix_random_seed=1 erf.restart=chk_for_restart_anel max_step=10 erf.terrain_type=None erf.molec_diff_type=Constant erf.dynamic_viscosity=0.001 erf.anelastic=1 erf.poisson_reltol=1.e-10 erf.poisson_abstol=1.e-10 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-12

[WoA_EB_x] 
buildDir = Exec
inputFile = RegTests/WitchOfAgnesi/inputs_EB_x
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 amr.max_grid_size_x=8 amr.max_grid_size_y=8 erf.plot_vars_1=x_velocity y_velocity z_velocity theta density pressure pert_dens amrex.fpe_trap_invalid=1
tolerance= 1.e-10
abs_tolerance= 1.e-10

[WoA_EB_y] 
buildDir = Exec
inputFile = RegTests/WitchOfAgnesi/inputs_EB_y
target = ERF
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=100 amr.max_grid_size_x=8 amr.max_grid_size_y=8  erf.plot_vars_1=x_velocity y_velocity z_velocity theta density pressure pert_dens amrex.fpe_trap_invalid=1
tolerance= 1.e-10
abs_tolerance= 1.e-10

[WPS_Test_restart]
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
buildDir = Exec
inputFile = RegTests/WPS_Test/inputs_wps
aux1File = RegTests/WPS_Test/wrfinput_chisholmview_d01
aux2File = RegTests/WPS_Test/wrfbdy_chisholmview_d01_width1
target = ERF
dim = 3
restartTest = 1
restartFileNum = 1
useMPI = 1
numprocs = 4
compileTest = 0
runtime_params = erf.terrain_type=StaticFittedMesh max_step=2 erf.fixed_mri_dt_ratio=2 amrex.fpe_trap_invalid=1

[WPS_Test]
addToCompileString = USE_PARTICLES=TRUE USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
buildDir  = Exec
inputFile = RegTests/WPS_Test/inputs_wps
aux1File  = RegTests/WPS_Test/wrfinput_chisholmview_d01
aux2File  = RegTests/WPS_Test/wrfbdy_chisholmview_d01_width1
target    = ERF
dim       = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
runtime_params = erf.terrain_type=StaticFittedMesh erf.fixed_mri_dt_ratio=2 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-14
fcompareOpts =

[WPS_Test-OMP]
addToCompileString = USE_NETCDF=TRUE NETCDF_DIR=/usr/local XTRALIBS="-L/usr/local/hdf5/lib -Xlinker -rpath -Xlinker /usr/local/hdf5/lib -lhdf5_hl -lhdf5"
buildDir  = Exec
inputFile = RegTests/WPS_Test/inputs_wps
aux1File  = RegTests/WPS_Test/wrfinput_chisholmview_d01
aux2File  = RegTests/WPS_Test/wrfbdy_chisholmview_d01_width1
target    = ERF
dim       = 3
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
runtime_params = erf.terrain_type=StaticFittedMesh erf.fixed_mri_dt_ratio=2 fabarray.mfiter_tile_size = 1024 16 16 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-14
fcompareOpts =

# Two-level version of WPS_Test-RRTMGP+SLM covering the surface-only init path
# (erf.interp_atmos_from_coarse, issue #4060): level 1 is created at step 5 from
# a wrfinput_d02 whose start time is 25 s after d01's. wrfinput_d02 is generated
# from wrfinput_d01 by RegTests/WPS_Test/make_wrfinput_d02.py (run it once in
# the data directory); the other aux files are shared with the SLM test above.
[WPS_Test-ML-Interp]
addToCompileString = USE_NETCDF=TRUE USE_RRTMGP=TRUE USE_NOAHMP=TRUE
buildDir  = Exec
inputFile = RegTests/WPS_Test/inputs_wps_ml_interp
aux1File  = RegTests/WPS_Test/wrfinput_d01
aux2File  = RegTests/WPS_Test/wrfbdy_d01
aux3File  = RegTests/WPS_Test/wrfinput_d02
aux4File  = RegTests/WPS_Test/rrtmgp-gas-lw-g128.nc
aux5File  = RegTests/WPS_Test/rrtmgp-gas-sw-g112.nc
aux6File  = RegTests/WPS_Test/rrtmgp-cloud-optics-coeffs-lw.nc
aux7File  = RegTests/WPS_Test/rrtmgp-cloud-optics-coeffs-sw.nc
aux8File  = RegTests/WPS_Test/NoahmpTable.TBL
target    = ERF
dim       = 3
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 0
compileTest = 0

[WPS_Test-RRTMGP+SLM]
addToCompileString = USE_NETCDF=TRUE USE_RRTMGP=TRUE USE_NOAHMP=TRUE
buildDir  = Exec
inputFile = RegTests/WPS_Test/inputs_slm_rrtmgp
aux1File  = RegTests/WPS_Test/wrfinput_d01
aux2File  = RegTests/WPS_Test/wrfbdy_d01
aux3File  = RegTests/WPS_Test/rrtmgp-gas-lw-g128.nc
aux4File  = RegTests/WPS_Test/rrtmgp-gas-sw-g112.nc
aux5File  = RegTests/WPS_Test/rrtmgp-cloud-optics-coeffs-lw.nc
aux6File  = RegTests/WPS_Test/rrtmgp-cloud-optics-coeffs-sw.nc
aux7File  = RegTests/WPS_Test/namelist.erf
aux8File  = RegTests/WPS_Test/NoahmpTable.TBL
target    = ERF
dim       = 3
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 0
compileTest = 0

[WPS_Test-RRTMGP+NOAHMP]
addToCompileString = USE_NETCDF=TRUE USE_RRTMGP=TRUE USE_NOAHMP=TRUE
buildDir  = Exec
inputFile = RegTests/WPS_Test/inputs_noah_rrtmgp
aux1File  = RegTests/WPS_Test/wrfinput_d01
aux2File  = RegTests/WPS_Test/wrfbdy_d01
aux3File  = RegTests/WPS_Test/rrtmgp-gas-lw-g128.nc
aux4File  = RegTests/WPS_Test/rrtmgp-gas-sw-g112.nc
aux5File  = RegTests/WPS_Test/rrtmgp-cloud-optics-coeffs-lw.nc
aux6File  = RegTests/WPS_Test/rrtmgp-cloud-optics-coeffs-sw.nc
aux7File  = RegTests/WPS_Test/namelist.erf
aux8File  = RegTests/WPS_Test/NoahmpTable.TBL
target    = ERF
dim       = 3
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 0
compileTest = 0
runtime_params = fabarray.mfiter_tile_size=1024 16 16 amrex.fpe_trap_invalid=1
tolerance= 1.e-12
abs_tolerance= 1.e-14
fcompareOpts =