Initializing AMReX (26.10-76-g347a3a2d2675)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.10-76-g347a3a2d2675) initialized Successfully read inputs file ... ERF git hash: 92410d578 AMReX git hash: 26.10-76-g347a3a2d2 Problem name (from inputs file) is: "Ekman Spiral" Reading NC init file names at level 0 and index 0 : wrfinput_ekman_d01 Level 0 is land Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) PBL thermal stratification variable: thetav Thermal stratification based on gradient of potential temperature Reading Times wrfinput datetime 0 : 0001-01-01_00:00:00 -62135596800 Have read start_time string at level 0 is 0001-01-01_00:00:00 Have read start_time number at level 0 is -6.21355968e+10 Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time -6.21355968e+10 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac at level 0 : 1 1 0 (theta = 1, moisture = 1, tke = 1, momenta = 1) use_coriolis : 1 use_gravity : 1 Moisture Model: Saturation Adjustment Terrain Type: StaticFittedMesh Flat fitted terrain: false Buildings Type: None Mesh Type: VariableDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 WRF lateral boundary density forcing: disabled WRF lateral boundary cloud-water/cloud-ice forcing: disabled Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (5,4,399) (0,0,0)) ((0,5,0) (5,9,399) (0,0,0)) ((6,0,0) (11,4,399) (0,0,0)) ((6,5,0) (11,9,399) (0,0,0)) ) Reading T00 from wrfinput Reading P00 from wrfinput Reading TLP from wrfinput Reading TISO from wrfinput Reading TLP_STRAT from wrfinput Reading P_STRAT from wrfinput WARNING: WRF base state parameters read from wrfinput_ekman_d01 are invalid: (T00, P00, TLP, TISO, TLP_STRAT, P_STRAT) = (0, 0, 0, 0, 0, 0) T00, P00 and TLP must all be positive and finite; reverting to ERF defaults. NOTE: the base state is built entirely from these six parameters -- PB and ALB in the file are not used -- so the resulting base state is synthetic and may be inconsistent with the state read from wrfinput_ekman_d01. WRF base state parameters (T00, P00, TLP, TISO, TLP_STRAT, P_STRAT) are: (290, 100000, 50, 200, -11, 0) Base state layer interfaces: z_iso = 12901.83486 m Loading initial data from NetCDF file at level 0 Reading from file wrfinput_ekman_d01 Will read density from ALB + AL variables Have read (nx,ny,nz) = 12 10 400 Have read (parent_ilo,parent_jlo) = 0 0 Have read refinement ratio = 1 Box in file ((0,0,0) (11,9,399) (0,0,0)) Box to fill ((0,0,0) (11,9,399) (0,0,0)) Checking for ALB ... Reading ALB Checking for AL ... Reading AL Checking for U ... Reading U Checking for V ... Reading V Checking for W ... Reading W Checking for THM ... Reading THM Checking for PH ... Reading PH Checking for PHB ... Reading PHB Checking for PB ... Reading PB Checking for P ... Reading P Checking for PSFC ... Reading PSFC PSFC read in had max of 0; replacing it by 1e5 everywhere Checking for MUB ... Reading MUB Checking for MAPFAC_U ... Reading MAPFAC_U MAPFAC_U cannot be 0, resetting to 1! MAPFAC_U resetting to 1 with lateral periodic BCs! Checking for MAPFAC_V ... Reading MAPFAC_V MAPFAC_V cannot be 0, resetting to 1! MAPFAC_V resetting to 1 with lateral periodic BCs! Checking for MAPFAC_M ... Reading MAPFAC_M MAPFAC_M cannot be 0, resetting to 1! MAPFAC_M resetting to 1 with lateral periodic BCs! Checking for SST ... Reading SST Checking for TSK ... Reading TSK Checking for LANDMASK ... Reading LANDMASK Checking for C1H ... Reading C1H Checking for C2H ... Reading C2H Checking for RDNW ... Reading RDNW Checking for XLAT ... Reading XLAT Checking for XLONG ... Reading XLONG Checking for QVAPOR ... Reading QVAPOR Checking for QCLOUD ... Skipping QCLOUD Setting QCLOUD to 0 since we couldn't read it in ... DONE Checking for IVGTYP ... Reading IVGTYP Checking for ISLTYP ... Reading ISLTYP Terrain has min value = 0 and max value = 0 Top of mesh has min value = 4999.998805 and max value = 4999.998805 Warning: ProbHi(2) will be ignored; we are setting top of domain to 4999.998805 Constructing nodal heights (z_phys_nd) Verifying grid integrity Cells whose height lies outside the wrfinput column, and are therefore extrapolated rather than interpolated: below the source column, bottom plane : 0 of 120 (0% of that plane) below the source column, interior : 0 above the source column : 120 total : 120 of 48000 (these are extrapolated from the two nearest source levels; theta linearly, every other primitive held) The state read from WRF is being rebalanced! Problem name "ekman spiral" does not add any state perturbations. Based on cfl of one Compressible dt at level 0 would be: 0.03471341263 (terrain aware) 0.03471341263 (terrain unaware) Anelastic dt at level 0 would be: 0.7810227303 (terrain aware) 0.7810227303 (terrain unaware) Fixed dt at level 0 is: 0.03 smallest grid spacing at level 0 = 11.61203491 dt at level 0 = 0.03 Viscous CFL is 0.0005562174344 Max value of |p_hse - p_eos| is 4.365574569e-11, less than the tolerance 9.992071048e-09 Min/max value of dp0/dx are zero Min/max value of dp0/dy are zero Min/max value of dp0/dz + rho0*|g| are less than 1e-08 Min/max value of x-gradient of full (moist) pressure are zero Min/max value of y-gradient of full (moist) pressure are zero Min/max value of moist dp/dz + rho_m*|g| are -4.751754545e-12 5.005773573e-12 with min at face (5,4,49) with max at face (5,4,50) Min/max value of -dp'/dz + buoyancy are -5.359768185e-12 5.193501879e-12 with min at face (5,4,106) with max at face (5,4,162) Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00000 3DPlotfile write time = 0.011445299 seconds. Writing native checkpoint EkmanSpiral_ideal_restart_chk00000 Writing Lat/Lon variables at level 0 Checkpoint write time = 0.011204141 seconds. TIME= 0 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 1-01-01 00:00:00.000000 (0 s elapsed) Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341263 (terrain aware) 0.03471341263 (terrain unaware) Anelastic dt at level 0 would be: 0.7810227303 (terrain aware) 0.7810227303 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.03 with dt = 0.03 Making slow rhs at time 0 for fast variables advancing from 0 to 0.01 No-substepping time integration at level 0 to 0.01 with dt = 0.01 Time integration of scalars at level 0 from 0 to 0.01 with dt = 0.01 using RHS created at 0 Making slow rhs at time 0.01 for fast variables advancing from 0 to 0.015 No-substepping time integration at level 0 to 0.015 with dt = 0.015 Time integration of scalars at level 0 from 0 to 0.015 with dt = 0.015 using RHS created at 0.01 Making slow rhs at time 0.015 for fast variables advancing from 0 to 0.03 No-substepping time integration at level 0 to 0.03 with dt = 0.03 Time integration of scalars at level 0 from 0 to 0.03 with dt = 0.03 using RHS created at 0.015 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 1] Advanced 48000 cells Cloud fraction 0 0 Coarse STEP 1 ends. TIME = 0.03 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112725195 seconds. TIME= 0.03 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00001 3DPlotfile write time = 0.012406276 seconds. 1-01-01 00:00:00.030000 (0.03 s elapsed) Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341257 (terrain aware) 0.03471341257 (terrain unaware) Anelastic dt at level 0 would be: 0.7810227116 (terrain aware) 0.7810227116 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 2] ADVANCE from elapsed time = 0.03 to 0.06 with dt = 0.03 Making slow rhs at time 0.03 for fast variables advancing from 0.03 to 0.04 No-substepping time integration at level 0 to 0.04 with dt = 0.01 Time integration of scalars at level 0 from 0.03 to 0.04 with dt = 0.01 using RHS created at 0.03 Making slow rhs at time 0.04 for fast variables advancing from 0.03 to 0.045 No-substepping time integration at level 0 to 0.045 with dt = 0.015 Time integration of scalars at level 0 from 0.03 to 0.045 with dt = 0.015 using RHS created at 0.04 Making slow rhs at time 0.045 for fast variables advancing from 0.03 to 0.06 No-substepping time integration at level 0 to 0.06 with dt = 0.03 Time integration of scalars at level 0 from 0.03 to 0.06 with dt = 0.03 using RHS created at 0.045 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 2] Advanced 48000 cells Cloud fraction 0.03 0 Coarse STEP 2 ends. TIME = 0.06 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112726324 seconds. TIME= 0.06 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00002 3DPlotfile write time = 0.012631775 seconds. 1-01-01 00:00:00.060000 (0.06 s elapsed) Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134125 (terrain aware) 0.0347134125 (terrain unaware) Anelastic dt at level 0 would be: 0.7810226928 (terrain aware) 0.7810226928 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 3] ADVANCE from elapsed time = 0.06 to 0.09 with dt = 0.03 Making slow rhs at time 0.06 for fast variables advancing from 0.06 to 0.07 No-substepping time integration at level 0 to 0.07 with dt = 0.01 Time integration of scalars at level 0 from 0.06 to 0.07 with dt = 0.01 using RHS created at 0.06 Making slow rhs at time 0.07 for fast variables advancing from 0.06 to 0.075 No-substepping time integration at level 0 to 0.075 with dt = 0.015 Time integration of scalars at level 0 from 0.06 to 0.075 with dt = 0.015 using RHS created at 0.07 Making slow rhs at time 0.075 for fast variables advancing from 0.06 to 0.09 No-substepping time integration at level 0 to 0.09 with dt = 0.03 Time integration of scalars at level 0 from 0.06 to 0.09 with dt = 0.03 using RHS created at 0.075 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 3] Advanced 48000 cells Cloud fraction 0.06 0 Coarse STEP 3 ends. TIME = 0.09 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111532037 seconds. TIME= 0.09 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00003 3DPlotfile write time = 0.012181015 seconds. 1-01-01 00:00:00.090000 (0.09 s elapsed) Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341244 (terrain aware) 0.03471341244 (terrain unaware) Anelastic dt at level 0 would be: 0.7810226741 (terrain aware) 0.7810226741 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 4] ADVANCE from elapsed time = 0.09 to 0.12 with dt = 0.03 Making slow rhs at time 0.09 for fast variables advancing from 0.09 to 0.1 No-substepping time integration at level 0 to 0.1 with dt = 0.01 Time integration of scalars at level 0 from 0.09 to 0.1 with dt = 0.01 using RHS created at 0.09 Making slow rhs at time 0.1 for fast variables advancing from 0.09 to 0.105 No-substepping time integration at level 0 to 0.105 with dt = 0.015 Time integration of scalars at level 0 from 0.09 to 0.105 with dt = 0.015 using RHS created at 0.1 Making slow rhs at time 0.105 for fast variables advancing from 0.09 to 0.12 No-substepping time integration at level 0 to 0.12 with dt = 0.03 Time integration of scalars at level 0 from 0.09 to 0.12 with dt = 0.03 using RHS created at 0.105 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 4] Advanced 48000 cells Cloud fraction 0.09 0 Coarse STEP 4 ends. TIME = 0.12 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111962136 seconds. TIME= 0.12 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00004 3DPlotfile write time = 0.011717412 seconds. 1-01-01 00:00:00.120000 (0.12 s elapsed) Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341238 (terrain aware) 0.03471341238 (terrain unaware) Anelastic dt at level 0 would be: 0.7810226553 (terrain aware) 0.7810226553 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 5] ADVANCE from elapsed time = 0.12 to 0.15 with dt = 0.03 Making slow rhs at time 0.12 for fast variables advancing from 0.12 to 0.13 No-substepping time integration at level 0 to 0.13 with dt = 0.01 Time integration of scalars at level 0 from 0.12 to 0.13 with dt = 0.01 using RHS created at 0.12 Making slow rhs at time 0.13 for fast variables advancing from 0.12 to 0.135 No-substepping time integration at level 0 to 0.135 with dt = 0.015 Time integration of scalars at level 0 from 0.12 to 0.135 with dt = 0.015 using RHS created at 0.13 Making slow rhs at time 0.135 for fast variables advancing from 0.12 to 0.15 No-substepping time integration at level 0 to 0.15 with dt = 0.03 Time integration of scalars at level 0 from 0.12 to 0.15 with dt = 0.03 using RHS created at 0.135 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 5] Advanced 48000 cells Cloud fraction 0.12 0 Coarse STEP 5 ends. TIME = 0.15 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.113036493 seconds. TIME= 0.15 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00005 3DPlotfile write time = 0.012210289 seconds. 1-01-01 00:00:00.150000 (0.15 s elapsed) Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341231 (terrain aware) 0.03471341231 (terrain unaware) Anelastic dt at level 0 would be: 0.7810226366 (terrain aware) 0.7810226366 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 6] ADVANCE from elapsed time = 0.15 to 0.18 with dt = 0.03 Making slow rhs at time 0.15 for fast variables advancing from 0.15 to 0.16 No-substepping time integration at level 0 to 0.16 with dt = 0.01 Time integration of scalars at level 0 from 0.15 to 0.16 with dt = 0.01 using RHS created at 0.15 Making slow rhs at time 0.16 for fast variables advancing from 0.15 to 0.165 No-substepping time integration at level 0 to 0.165 with dt = 0.015 Time integration of scalars at level 0 from 0.15 to 0.165 with dt = 0.015 using RHS created at 0.16 Making slow rhs at time 0.165 for fast variables advancing from 0.15 to 0.18 No-substepping time integration at level 0 to 0.18 with dt = 0.03 Time integration of scalars at level 0 from 0.15 to 0.18 with dt = 0.03 using RHS created at 0.165 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 6] Advanced 48000 cells Cloud fraction 0.15 0 Coarse STEP 6 ends. TIME = 0.18 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112399787 seconds. TIME= 0.18 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00006 3DPlotfile write time = 0.012511975 seconds. 1-01-01 00:00:00.180000 (0.18 s elapsed) Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341225 (terrain aware) 0.03471341225 (terrain unaware) Anelastic dt at level 0 would be: 0.7810226178 (terrain aware) 0.7810226178 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 7] ADVANCE from elapsed time = 0.18 to 0.21 with dt = 0.03 Making slow rhs at time 0.18 for fast variables advancing from 0.18 to 0.19 No-substepping time integration at level 0 to 0.19 with dt = 0.01 Time integration of scalars at level 0 from 0.18 to 0.19 with dt = 0.01 using RHS created at 0.18 Making slow rhs at time 0.19 for fast variables advancing from 0.18 to 0.195 No-substepping time integration at level 0 to 0.195 with dt = 0.015 Time integration of scalars at level 0 from 0.18 to 0.195 with dt = 0.015 using RHS created at 0.19 Making slow rhs at time 0.195 for fast variables advancing from 0.18 to 0.21 No-substepping time integration at level 0 to 0.21 with dt = 0.03 Time integration of scalars at level 0 from 0.18 to 0.21 with dt = 0.03 using RHS created at 0.195 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 7] Advanced 48000 cells Cloud fraction 0.18 0 Coarse STEP 7 ends. TIME = 0.21 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112434113 seconds. TIME= 0.21 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00007 3DPlotfile write time = 0.011839495 seconds. 1-01-01 00:00:00.210000 (0.21 s elapsed) Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341219 (terrain aware) 0.03471341219 (terrain unaware) Anelastic dt at level 0 would be: 0.7810225991 (terrain aware) 0.7810225991 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 8] ADVANCE from elapsed time = 0.21 to 0.24 with dt = 0.03 Making slow rhs at time 0.21 for fast variables advancing from 0.21 to 0.22 No-substepping time integration at level 0 to 0.22 with dt = 0.01 Time integration of scalars at level 0 from 0.21 to 0.22 with dt = 0.01 using RHS created at 0.21 Making slow rhs at time 0.22 for fast variables advancing from 0.21 to 0.225 No-substepping time integration at level 0 to 0.225 with dt = 0.015 Time integration of scalars at level 0 from 0.21 to 0.225 with dt = 0.015 using RHS created at 0.22 Making slow rhs at time 0.225 for fast variables advancing from 0.21 to 0.24 No-substepping time integration at level 0 to 0.24 with dt = 0.03 Time integration of scalars at level 0 from 0.21 to 0.24 with dt = 0.03 using RHS created at 0.225 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 8] Advanced 48000 cells Cloud fraction 0.21 0 Coarse STEP 8 ends. TIME = 0.24 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112004596 seconds. TIME= 0.24 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00008 3DPlotfile write time = 0.012357389 seconds. 1-01-01 00:00:00.240000 (0.24 s elapsed) Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341212 (terrain aware) 0.03471341212 (terrain unaware) Anelastic dt at level 0 would be: 0.7810225803 (terrain aware) 0.7810225803 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 9] ADVANCE from elapsed time = 0.24 to 0.27 with dt = 0.03 Making slow rhs at time 0.24 for fast variables advancing from 0.24 to 0.25 No-substepping time integration at level 0 to 0.25 with dt = 0.01 Time integration of scalars at level 0 from 0.24 to 0.25 with dt = 0.01 using RHS created at 0.24 Making slow rhs at time 0.25 for fast variables advancing from 0.24 to 0.255 No-substepping time integration at level 0 to 0.255 with dt = 0.015 Time integration of scalars at level 0 from 0.24 to 0.255 with dt = 0.015 using RHS created at 0.25 Making slow rhs at time 0.255 for fast variables advancing from 0.24 to 0.27 No-substepping time integration at level 0 to 0.27 with dt = 0.03 Time integration of scalars at level 0 from 0.24 to 0.27 with dt = 0.03 using RHS created at 0.255 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 9] Advanced 48000 cells Cloud fraction 0.24 0 Coarse STEP 9 ends. TIME = 0.27 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112236814 seconds. TIME= 0.27 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00009 3DPlotfile write time = 0.012479301 seconds. 1-01-01 00:00:00.270000 (0.27 s elapsed) Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341206 (terrain aware) 0.03471341206 (terrain unaware) Anelastic dt at level 0 would be: 0.7810225616 (terrain aware) 0.7810225616 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 10] ADVANCE from elapsed time = 0.27 to 0.3 with dt = 0.03 Making slow rhs at time 0.27 for fast variables advancing from 0.27 to 0.28 No-substepping time integration at level 0 to 0.28 with dt = 0.01 Time integration of scalars at level 0 from 0.27 to 0.28 with dt = 0.01 using RHS created at 0.27 Making slow rhs at time 0.28 for fast variables advancing from 0.27 to 0.285 No-substepping time integration at level 0 to 0.285 with dt = 0.015 Time integration of scalars at level 0 from 0.27 to 0.285 with dt = 0.015 using RHS created at 0.28 Making slow rhs at time 0.285 for fast variables advancing from 0.27 to 0.3 No-substepping time integration at level 0 to 0.3 with dt = 0.03 Time integration of scalars at level 0 from 0.27 to 0.3 with dt = 0.03 using RHS created at 0.285 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 10] Advanced 48000 cells Cloud fraction 0.27 0 Coarse STEP 10 ends. TIME = 0.3 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112369538 seconds. TIME= 0.3 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00010 3DPlotfile write time = 0.012217312 seconds. 1-01-01 00:00:00.300000 (0.3 s elapsed) Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341199 (terrain aware) 0.03471341199 (terrain unaware) Anelastic dt at level 0 would be: 0.7810225428 (terrain aware) 0.7810225428 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 11] ADVANCE from elapsed time = 0.3 to 0.33 with dt = 0.03 Making slow rhs at time 0.3 for fast variables advancing from 0.3 to 0.31 No-substepping time integration at level 0 to 0.31 with dt = 0.01 Time integration of scalars at level 0 from 0.3 to 0.31 with dt = 0.01 using RHS created at 0.3 Making slow rhs at time 0.31 for fast variables advancing from 0.3 to 0.315 No-substepping time integration at level 0 to 0.315 with dt = 0.015 Time integration of scalars at level 0 from 0.3 to 0.315 with dt = 0.015 using RHS created at 0.31 Making slow rhs at time 0.315 for fast variables advancing from 0.3 to 0.33 No-substepping time integration at level 0 to 0.33 with dt = 0.03 Time integration of scalars at level 0 from 0.3 to 0.33 with dt = 0.03 using RHS created at 0.315 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 11] Advanced 48000 cells Cloud fraction 0.3 0 Coarse STEP 11 ends. TIME = 0.33 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112814215 seconds. TIME= 0.33 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00011 3DPlotfile write time = 0.012813421 seconds. 1-01-01 00:00:00.330000 (0.33 s elapsed) Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341193 (terrain aware) 0.03471341193 (terrain unaware) Anelastic dt at level 0 would be: 0.781022524 (terrain aware) 0.781022524 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 12] ADVANCE from elapsed time = 0.33 to 0.36 with dt = 0.03 Making slow rhs at time 0.33 for fast variables advancing from 0.33 to 0.34 No-substepping time integration at level 0 to 0.34 with dt = 0.01 Time integration of scalars at level 0 from 0.33 to 0.34 with dt = 0.01 using RHS created at 0.33 Making slow rhs at time 0.34 for fast variables advancing from 0.33 to 0.345 No-substepping time integration at level 0 to 0.345 with dt = 0.015 Time integration of scalars at level 0 from 0.33 to 0.345 with dt = 0.015 using RHS created at 0.34 Making slow rhs at time 0.345 for fast variables advancing from 0.33 to 0.36 No-substepping time integration at level 0 to 0.36 with dt = 0.03 Time integration of scalars at level 0 from 0.33 to 0.36 with dt = 0.03 using RHS created at 0.345 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 12] Advanced 48000 cells Cloud fraction 0.33 0 Coarse STEP 12 ends. TIME = 0.36 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111738737 seconds. TIME= 0.36 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00012 3DPlotfile write time = 0.012064173 seconds. 1-01-01 00:00:00.360000 (0.36 s elapsed) Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341187 (terrain aware) 0.03471341187 (terrain unaware) Anelastic dt at level 0 would be: 0.7810225053 (terrain aware) 0.7810225053 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 13] ADVANCE from elapsed time = 0.36 to 0.39 with dt = 0.03 Making slow rhs at time 0.36 for fast variables advancing from 0.36 to 0.37 No-substepping time integration at level 0 to 0.37 with dt = 0.01 Time integration of scalars at level 0 from 0.36 to 0.37 with dt = 0.01 using RHS created at 0.36 Making slow rhs at time 0.37 for fast variables advancing from 0.36 to 0.375 No-substepping time integration at level 0 to 0.375 with dt = 0.015 Time integration of scalars at level 0 from 0.36 to 0.375 with dt = 0.015 using RHS created at 0.37 Making slow rhs at time 0.375 for fast variables advancing from 0.36 to 0.39 No-substepping time integration at level 0 to 0.39 with dt = 0.03 Time integration of scalars at level 0 from 0.36 to 0.39 with dt = 0.03 using RHS created at 0.375 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 13] Advanced 48000 cells Cloud fraction 0.36 0 Coarse STEP 13 ends. TIME = 0.39 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111210452 seconds. TIME= 0.39 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00013 3DPlotfile write time = 0.012345076 seconds. 1-01-01 00:00:00.390000 (0.39 s elapsed) Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134118 (terrain aware) 0.0347134118 (terrain unaware) Anelastic dt at level 0 would be: 0.7810224865 (terrain aware) 0.7810224865 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 14] ADVANCE from elapsed time = 0.39 to 0.42 with dt = 0.03 Making slow rhs at time 0.39 for fast variables advancing from 0.39 to 0.4 No-substepping time integration at level 0 to 0.4 with dt = 0.01 Time integration of scalars at level 0 from 0.39 to 0.4 with dt = 0.01 using RHS created at 0.39 Making slow rhs at time 0.4 for fast variables advancing from 0.39 to 0.405 No-substepping time integration at level 0 to 0.405 with dt = 0.015 Time integration of scalars at level 0 from 0.39 to 0.405 with dt = 0.015 using RHS created at 0.4 Making slow rhs at time 0.405 for fast variables advancing from 0.39 to 0.42 No-substepping time integration at level 0 to 0.42 with dt = 0.03 Time integration of scalars at level 0 from 0.39 to 0.42 with dt = 0.03 using RHS created at 0.405 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 14] Advanced 48000 cells Cloud fraction 0.39 0 Coarse STEP 14 ends. TIME = 0.42 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112039265 seconds. TIME= 0.42 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00014 3DPlotfile write time = 0.012476026 seconds. 1-01-01 00:00:00.420000 (0.42 s elapsed) Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341174 (terrain aware) 0.03471341174 (terrain unaware) Anelastic dt at level 0 would be: 0.7810224677 (terrain aware) 0.7810224677 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 15] ADVANCE from elapsed time = 0.42 to 0.45 with dt = 0.03 Making slow rhs at time 0.42 for fast variables advancing from 0.42 to 0.43 No-substepping time integration at level 0 to 0.43 with dt = 0.01 Time integration of scalars at level 0 from 0.42 to 0.43 with dt = 0.01 using RHS created at 0.42 Making slow rhs at time 0.43 for fast variables advancing from 0.42 to 0.435 No-substepping time integration at level 0 to 0.435 with dt = 0.015 Time integration of scalars at level 0 from 0.42 to 0.435 with dt = 0.015 using RHS created at 0.43 Making slow rhs at time 0.435 for fast variables advancing from 0.42 to 0.45 No-substepping time integration at level 0 to 0.45 with dt = 0.03 Time integration of scalars at level 0 from 0.42 to 0.45 with dt = 0.03 using RHS created at 0.435 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 15] Advanced 48000 cells Cloud fraction 0.42 0 Coarse STEP 15 ends. TIME = 0.45 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111423843 seconds. TIME= 0.45 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00015 3DPlotfile write time = 0.012417044 seconds. 1-01-01 00:00:00.450000 (0.45 s elapsed) Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341167 (terrain aware) 0.03471341167 (terrain unaware) Anelastic dt at level 0 would be: 0.7810224489 (terrain aware) 0.7810224489 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 16] ADVANCE from elapsed time = 0.45 to 0.48 with dt = 0.03 Making slow rhs at time 0.45 for fast variables advancing from 0.45 to 0.46 No-substepping time integration at level 0 to 0.46 with dt = 0.01 Time integration of scalars at level 0 from 0.45 to 0.46 with dt = 0.01 using RHS created at 0.45 Making slow rhs at time 0.46 for fast variables advancing from 0.45 to 0.465 No-substepping time integration at level 0 to 0.465 with dt = 0.015 Time integration of scalars at level 0 from 0.45 to 0.465 with dt = 0.015 using RHS created at 0.46 Making slow rhs at time 0.465 for fast variables advancing from 0.45 to 0.48 No-substepping time integration at level 0 to 0.48 with dt = 0.03 Time integration of scalars at level 0 from 0.45 to 0.48 with dt = 0.03 using RHS created at 0.465 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 16] Advanced 48000 cells Cloud fraction 0.45 0 Coarse STEP 16 ends. TIME = 0.48 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111735736 seconds. TIME= 0.48 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00016 3DPlotfile write time = 0.012635013 seconds. 1-01-01 00:00:00.480000 (0.48 s elapsed) Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341161 (terrain aware) 0.03471341161 (terrain unaware) Anelastic dt at level 0 would be: 0.7810224301 (terrain aware) 0.7810224301 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 17] ADVANCE from elapsed time = 0.48 to 0.51 with dt = 0.03 Making slow rhs at time 0.48 for fast variables advancing from 0.48 to 0.49 No-substepping time integration at level 0 to 0.49 with dt = 0.01 Time integration of scalars at level 0 from 0.48 to 0.49 with dt = 0.01 using RHS created at 0.48 Making slow rhs at time 0.49 for fast variables advancing from 0.48 to 0.495 No-substepping time integration at level 0 to 0.495 with dt = 0.015 Time integration of scalars at level 0 from 0.48 to 0.495 with dt = 0.015 using RHS created at 0.49 Making slow rhs at time 0.495 for fast variables advancing from 0.48 to 0.51 No-substepping time integration at level 0 to 0.51 with dt = 0.03 Time integration of scalars at level 0 from 0.48 to 0.51 with dt = 0.03 using RHS created at 0.495 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 17] Advanced 48000 cells Cloud fraction 0.48 0 Coarse STEP 17 ends. TIME = 0.51 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111098245 seconds. TIME= 0.51 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00017 3DPlotfile write time = 0.011614897 seconds. 1-01-01 00:00:00.510000 (0.51 s elapsed) Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341155 (terrain aware) 0.03471341155 (terrain unaware) Anelastic dt at level 0 would be: 0.7810224114 (terrain aware) 0.7810224114 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 18] ADVANCE from elapsed time = 0.51 to 0.54 with dt = 0.03 Making slow rhs at time 0.51 for fast variables advancing from 0.51 to 0.52 No-substepping time integration at level 0 to 0.52 with dt = 0.01 Time integration of scalars at level 0 from 0.51 to 0.52 with dt = 0.01 using RHS created at 0.51 Making slow rhs at time 0.52 for fast variables advancing from 0.51 to 0.525 No-substepping time integration at level 0 to 0.525 with dt = 0.015 Time integration of scalars at level 0 from 0.51 to 0.525 with dt = 0.015 using RHS created at 0.52 Making slow rhs at time 0.525 for fast variables advancing from 0.51 to 0.54 No-substepping time integration at level 0 to 0.54 with dt = 0.03 Time integration of scalars at level 0 from 0.51 to 0.54 with dt = 0.03 using RHS created at 0.525 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 18] Advanced 48000 cells Cloud fraction 0.51 0 Coarse STEP 18 ends. TIME = 0.54 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112412265 seconds. TIME= 0.54 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00018 3DPlotfile write time = 0.012473397 seconds. 1-01-01 00:00:00.540000 (0.54 s elapsed) Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341148 (terrain aware) 0.03471341148 (terrain unaware) Anelastic dt at level 0 would be: 0.7810223926 (terrain aware) 0.7810223926 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 19] ADVANCE from elapsed time = 0.54 to 0.57 with dt = 0.03 Making slow rhs at time 0.54 for fast variables advancing from 0.54 to 0.55 No-substepping time integration at level 0 to 0.55 with dt = 0.01 Time integration of scalars at level 0 from 0.54 to 0.55 with dt = 0.01 using RHS created at 0.54 Making slow rhs at time 0.55 for fast variables advancing from 0.54 to 0.555 No-substepping time integration at level 0 to 0.555 with dt = 0.015 Time integration of scalars at level 0 from 0.54 to 0.555 with dt = 0.015 using RHS created at 0.55 Making slow rhs at time 0.555 for fast variables advancing from 0.54 to 0.57 No-substepping time integration at level 0 to 0.57 with dt = 0.03 Time integration of scalars at level 0 from 0.54 to 0.57 with dt = 0.03 using RHS created at 0.555 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 19] Advanced 48000 cells Cloud fraction 0.54 0 Coarse STEP 19 ends. TIME = 0.57 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112108785 seconds. TIME= 0.57 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00019 3DPlotfile write time = 0.012558757 seconds. 1-01-01 00:00:00.570000 (0.57 s elapsed) Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341142 (terrain aware) 0.03471341142 (terrain unaware) Anelastic dt at level 0 would be: 0.7810223738 (terrain aware) 0.7810223738 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 20] ADVANCE from elapsed time = 0.57 to 0.6 with dt = 0.03 Making slow rhs at time 0.57 for fast variables advancing from 0.57 to 0.58 No-substepping time integration at level 0 to 0.58 with dt = 0.01 Time integration of scalars at level 0 from 0.57 to 0.58 with dt = 0.01 using RHS created at 0.57 Making slow rhs at time 0.58 for fast variables advancing from 0.57 to 0.585 No-substepping time integration at level 0 to 0.585 with dt = 0.015 Time integration of scalars at level 0 from 0.57 to 0.585 with dt = 0.015 using RHS created at 0.58 Making slow rhs at time 0.585 for fast variables advancing from 0.57 to 0.6 No-substepping time integration at level 0 to 0.6 with dt = 0.03 Time integration of scalars at level 0 from 0.57 to 0.6 with dt = 0.03 using RHS created at 0.585 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 20] Advanced 48000 cells Cloud fraction 0.57 0 Coarse STEP 20 ends. TIME = 0.6 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112073599 seconds. TIME= 0.6 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00020 3DPlotfile write time = 0.01230692 seconds. 1-01-01 00:00:00.600000 (0.6 s elapsed) Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341135 (terrain aware) 0.03471341135 (terrain unaware) Anelastic dt at level 0 would be: 0.781022355 (terrain aware) 0.781022355 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 21] ADVANCE from elapsed time = 0.6 to 0.63 with dt = 0.03 Making slow rhs at time 0.6 for fast variables advancing from 0.6 to 0.61 No-substepping time integration at level 0 to 0.61 with dt = 0.01 Time integration of scalars at level 0 from 0.6 to 0.61 with dt = 0.01 using RHS created at 0.6 Making slow rhs at time 0.61 for fast variables advancing from 0.6 to 0.615 No-substepping time integration at level 0 to 0.615 with dt = 0.015 Time integration of scalars at level 0 from 0.6 to 0.615 with dt = 0.015 using RHS created at 0.61 Making slow rhs at time 0.615 for fast variables advancing from 0.6 to 0.63 No-substepping time integration at level 0 to 0.63 with dt = 0.03 Time integration of scalars at level 0 from 0.6 to 0.63 with dt = 0.03 using RHS created at 0.615 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 21] Advanced 48000 cells Cloud fraction 0.6 0 Coarse STEP 21 ends. TIME = 0.63 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111424397 seconds. TIME= 0.63 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00021 3DPlotfile write time = 0.012343294 seconds. 1-01-01 00:00:00.630000 (0.63 s elapsed) Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341129 (terrain aware) 0.03471341129 (terrain unaware) Anelastic dt at level 0 would be: 0.7810223362 (terrain aware) 0.7810223362 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 22] ADVANCE from elapsed time = 0.63 to 0.66 with dt = 0.03 Making slow rhs at time 0.63 for fast variables advancing from 0.63 to 0.64 No-substepping time integration at level 0 to 0.64 with dt = 0.01 Time integration of scalars at level 0 from 0.63 to 0.64 with dt = 0.01 using RHS created at 0.63 Making slow rhs at time 0.64 for fast variables advancing from 0.63 to 0.645 No-substepping time integration at level 0 to 0.645 with dt = 0.015 Time integration of scalars at level 0 from 0.63 to 0.645 with dt = 0.015 using RHS created at 0.64 Making slow rhs at time 0.645 for fast variables advancing from 0.63 to 0.66 No-substepping time integration at level 0 to 0.66 with dt = 0.03 Time integration of scalars at level 0 from 0.63 to 0.66 with dt = 0.03 using RHS created at 0.645 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 22] Advanced 48000 cells Cloud fraction 0.63 0 Coarse STEP 22 ends. TIME = 0.66 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111953464 seconds. TIME= 0.66 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00022 3DPlotfile write time = 0.012797448 seconds. 1-01-01 00:00:00.660000 (0.66 s elapsed) Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341122 (terrain aware) 0.03471341122 (terrain unaware) Anelastic dt at level 0 would be: 0.7810223174 (terrain aware) 0.7810223174 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 23] ADVANCE from elapsed time = 0.66 to 0.69 with dt = 0.03 Making slow rhs at time 0.66 for fast variables advancing from 0.66 to 0.67 No-substepping time integration at level 0 to 0.67 with dt = 0.01 Time integration of scalars at level 0 from 0.66 to 0.67 with dt = 0.01 using RHS created at 0.66 Making slow rhs at time 0.67 for fast variables advancing from 0.66 to 0.675 No-substepping time integration at level 0 to 0.675 with dt = 0.015 Time integration of scalars at level 0 from 0.66 to 0.675 with dt = 0.015 using RHS created at 0.67 Making slow rhs at time 0.675 for fast variables advancing from 0.66 to 0.69 No-substepping time integration at level 0 to 0.69 with dt = 0.03 Time integration of scalars at level 0 from 0.66 to 0.69 with dt = 0.03 using RHS created at 0.675 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 23] Advanced 48000 cells Cloud fraction 0.66 0 Coarse STEP 23 ends. TIME = 0.69 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111927721 seconds. TIME= 0.69 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00023 3DPlotfile write time = 0.012648501 seconds. 1-01-01 00:00:00.690000 (0.69 s elapsed) Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341116 (terrain aware) 0.03471341116 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222985 (terrain aware) 0.7810222985 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 24] ADVANCE from elapsed time = 0.69 to 0.72 with dt = 0.03 Making slow rhs at time 0.69 for fast variables advancing from 0.69 to 0.7 No-substepping time integration at level 0 to 0.7 with dt = 0.01 Time integration of scalars at level 0 from 0.69 to 0.7 with dt = 0.01 using RHS created at 0.69 Making slow rhs at time 0.7 for fast variables advancing from 0.69 to 0.705 No-substepping time integration at level 0 to 0.705 with dt = 0.015 Time integration of scalars at level 0 from 0.69 to 0.705 with dt = 0.015 using RHS created at 0.7 Making slow rhs at time 0.705 for fast variables advancing from 0.69 to 0.72 No-substepping time integration at level 0 to 0.72 with dt = 0.03 Time integration of scalars at level 0 from 0.69 to 0.72 with dt = 0.03 using RHS created at 0.705 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 24] Advanced 48000 cells Cloud fraction 0.69 0 Coarse STEP 24 ends. TIME = 0.72 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111579 seconds. TIME= 0.72 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00024 3DPlotfile write time = 0.012747976 seconds. 1-01-01 00:00:00.720000 (0.72 s elapsed) Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134111 (terrain aware) 0.0347134111 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222797 (terrain aware) 0.7810222797 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 25] ADVANCE from elapsed time = 0.72 to 0.75 with dt = 0.03 Making slow rhs at time 0.72 for fast variables advancing from 0.72 to 0.73 No-substepping time integration at level 0 to 0.73 with dt = 0.01 Time integration of scalars at level 0 from 0.72 to 0.73 with dt = 0.01 using RHS created at 0.72 Making slow rhs at time 0.73 for fast variables advancing from 0.72 to 0.735 No-substepping time integration at level 0 to 0.735 with dt = 0.015 Time integration of scalars at level 0 from 0.72 to 0.735 with dt = 0.015 using RHS created at 0.73 Making slow rhs at time 0.735 for fast variables advancing from 0.72 to 0.75 No-substepping time integration at level 0 to 0.75 with dt = 0.03 Time integration of scalars at level 0 from 0.72 to 0.75 with dt = 0.03 using RHS created at 0.735 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 25] Advanced 48000 cells Cloud fraction 0.72 0 Coarse STEP 25 ends. TIME = 0.75 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.11156966 seconds. TIME= 0.75 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00025 3DPlotfile write time = 0.012336907 seconds. Writing native checkpoint EkmanSpiral_ideal_restart_chk00025 Writing Lat/Lon variables at level 0 Checkpoint write time = 0.010287787 seconds. 1-01-01 00:00:00.750000 (0.75 s elapsed) Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341103 (terrain aware) 0.03471341103 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222609 (terrain aware) 0.7810222609 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 26] ADVANCE from elapsed time = 0.75 to 0.78 with dt = 0.03 Making slow rhs at time 0.75 for fast variables advancing from 0.75 to 0.76 No-substepping time integration at level 0 to 0.76 with dt = 0.01 Time integration of scalars at level 0 from 0.75 to 0.76 with dt = 0.01 using RHS created at 0.75 Making slow rhs at time 0.76 for fast variables advancing from 0.75 to 0.765 No-substepping time integration at level 0 to 0.765 with dt = 0.015 Time integration of scalars at level 0 from 0.75 to 0.765 with dt = 0.015 using RHS created at 0.76 Making slow rhs at time 0.765 for fast variables advancing from 0.75 to 0.78 No-substepping time integration at level 0 to 0.78 with dt = 0.03 Time integration of scalars at level 0 from 0.75 to 0.78 with dt = 0.03 using RHS created at 0.765 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 26] Advanced 48000 cells Cloud fraction 0.75 0 Coarse STEP 26 ends. TIME = 0.78 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.113786051 seconds. TIME= 0.78 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00026 3DPlotfile write time = 0.013051873 seconds. 1-01-01 00:00:00.780000 (0.78 s elapsed) Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341097 (terrain aware) 0.03471341097 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222421 (terrain aware) 0.7810222421 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 27] ADVANCE from elapsed time = 0.78 to 0.81 with dt = 0.03 Making slow rhs at time 0.78 for fast variables advancing from 0.78 to 0.79 No-substepping time integration at level 0 to 0.79 with dt = 0.01 Time integration of scalars at level 0 from 0.78 to 0.79 with dt = 0.01 using RHS created at 0.78 Making slow rhs at time 0.79 for fast variables advancing from 0.78 to 0.795 No-substepping time integration at level 0 to 0.795 with dt = 0.015 Time integration of scalars at level 0 from 0.78 to 0.795 with dt = 0.015 using RHS created at 0.79 Making slow rhs at time 0.795 for fast variables advancing from 0.78 to 0.81 No-substepping time integration at level 0 to 0.81 with dt = 0.03 Time integration of scalars at level 0 from 0.78 to 0.81 with dt = 0.03 using RHS created at 0.795 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 27] Advanced 48000 cells Cloud fraction 0.78 0 Coarse STEP 27 ends. TIME = 0.81 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112139702 seconds. TIME= 0.81 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00027 3DPlotfile write time = 0.012663606 seconds. 1-01-01 00:00:00.810000 (0.81 s elapsed) Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134109 (terrain aware) 0.0347134109 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222233 (terrain aware) 0.7810222233 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 28] ADVANCE from elapsed time = 0.81 to 0.84 with dt = 0.03 Making slow rhs at time 0.81 for fast variables advancing from 0.81 to 0.82 No-substepping time integration at level 0 to 0.82 with dt = 0.01 Time integration of scalars at level 0 from 0.81 to 0.82 with dt = 0.01 using RHS created at 0.81 Making slow rhs at time 0.82 for fast variables advancing from 0.81 to 0.825 No-substepping time integration at level 0 to 0.825 with dt = 0.015 Time integration of scalars at level 0 from 0.81 to 0.825 with dt = 0.015 using RHS created at 0.82 Making slow rhs at time 0.825 for fast variables advancing from 0.81 to 0.84 No-substepping time integration at level 0 to 0.84 with dt = 0.03 Time integration of scalars at level 0 from 0.81 to 0.84 with dt = 0.03 using RHS created at 0.825 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 28] Advanced 48000 cells Cloud fraction 0.81 0 Coarse STEP 28 ends. TIME = 0.84 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111748117 seconds. TIME= 0.84 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00028 3DPlotfile write time = 0.012355199 seconds. 1-01-01 00:00:00.840000 (0.84 s elapsed) Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341084 (terrain aware) 0.03471341084 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222045 (terrain aware) 0.7810222045 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 29] ADVANCE from elapsed time = 0.84 to 0.87 with dt = 0.03 Making slow rhs at time 0.84 for fast variables advancing from 0.84 to 0.85 No-substepping time integration at level 0 to 0.85 with dt = 0.01 Time integration of scalars at level 0 from 0.84 to 0.85 with dt = 0.01 using RHS created at 0.84 Making slow rhs at time 0.85 for fast variables advancing from 0.84 to 0.855 No-substepping time integration at level 0 to 0.855 with dt = 0.015 Time integration of scalars at level 0 from 0.84 to 0.855 with dt = 0.015 using RHS created at 0.85 Making slow rhs at time 0.855 for fast variables advancing from 0.84 to 0.87 No-substepping time integration at level 0 to 0.87 with dt = 0.03 Time integration of scalars at level 0 from 0.84 to 0.87 with dt = 0.03 using RHS created at 0.855 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 29] Advanced 48000 cells Cloud fraction 0.84 0 Coarse STEP 29 ends. TIME = 0.87 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.1121572 seconds. TIME= 0.87 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00029 3DPlotfile write time = 0.012317133 seconds. 1-01-01 00:00:00.870000 (0.87 s elapsed) Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341077 (terrain aware) 0.03471341077 (terrain unaware) Anelastic dt at level 0 would be: 0.7810221856 (terrain aware) 0.7810221856 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 30] ADVANCE from elapsed time = 0.87 to 0.9 with dt = 0.03 Making slow rhs at time 0.87 for fast variables advancing from 0.87 to 0.88 No-substepping time integration at level 0 to 0.88 with dt = 0.01 Time integration of scalars at level 0 from 0.87 to 0.88 with dt = 0.01 using RHS created at 0.87 Making slow rhs at time 0.88 for fast variables advancing from 0.87 to 0.885 No-substepping time integration at level 0 to 0.885 with dt = 0.015 Time integration of scalars at level 0 from 0.87 to 0.885 with dt = 0.015 using RHS created at 0.88 Making slow rhs at time 0.885 for fast variables advancing from 0.87 to 0.9 No-substepping time integration at level 0 to 0.9 with dt = 0.03 Time integration of scalars at level 0 from 0.87 to 0.9 with dt = 0.03 using RHS created at 0.885 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 30] Advanced 48000 cells Cloud fraction 0.87 0 Coarse STEP 30 ends. TIME = 0.9 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112085266 seconds. TIME= 0.9 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00030 3DPlotfile write time = 0.012512768 seconds. 1-01-01 00:00:00.900000 (0.9 s elapsed) Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341071 (terrain aware) 0.03471341071 (terrain unaware) Anelastic dt at level 0 would be: 0.7810221668 (terrain aware) 0.7810221668 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 31] ADVANCE from elapsed time = 0.9 to 0.93 with dt = 0.03 Making slow rhs at time 0.9 for fast variables advancing from 0.9 to 0.91 No-substepping time integration at level 0 to 0.91 with dt = 0.01 Time integration of scalars at level 0 from 0.9 to 0.91 with dt = 0.01 using RHS created at 0.9 Making slow rhs at time 0.91 for fast variables advancing from 0.9 to 0.915 No-substepping time integration at level 0 to 0.915 with dt = 0.015 Time integration of scalars at level 0 from 0.9 to 0.915 with dt = 0.015 using RHS created at 0.91 Making slow rhs at time 0.915 for fast variables advancing from 0.9 to 0.93 No-substepping time integration at level 0 to 0.93 with dt = 0.03 Time integration of scalars at level 0 from 0.9 to 0.93 with dt = 0.03 using RHS created at 0.915 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 31] Advanced 48000 cells Cloud fraction 0.9 0 Coarse STEP 31 ends. TIME = 0.93 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112316176 seconds. TIME= 0.93 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00031 3DPlotfile write time = 0.011982382 seconds. 1-01-01 00:00:00.930000 (0.93 s elapsed) Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341064 (terrain aware) 0.03471341064 (terrain unaware) Anelastic dt at level 0 would be: 0.781022148 (terrain aware) 0.781022148 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 32] ADVANCE from elapsed time = 0.93 to 0.96 with dt = 0.03 Making slow rhs at time 0.93 for fast variables advancing from 0.93 to 0.94 No-substepping time integration at level 0 to 0.94 with dt = 0.01 Time integration of scalars at level 0 from 0.93 to 0.94 with dt = 0.01 using RHS created at 0.93 Making slow rhs at time 0.94 for fast variables advancing from 0.93 to 0.945 No-substepping time integration at level 0 to 0.945 with dt = 0.015 Time integration of scalars at level 0 from 0.93 to 0.945 with dt = 0.015 using RHS created at 0.94 Making slow rhs at time 0.945 for fast variables advancing from 0.93 to 0.96 No-substepping time integration at level 0 to 0.96 with dt = 0.03 Time integration of scalars at level 0 from 0.93 to 0.96 with dt = 0.03 using RHS created at 0.945 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 32] Advanced 48000 cells Cloud fraction 0.93 0 Coarse STEP 32 ends. TIME = 0.96 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111223189 seconds. TIME= 0.96 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00032 3DPlotfile write time = 0.012204271 seconds. 1-01-01 00:00:00.960000 (0.96 s elapsed) Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341058 (terrain aware) 0.03471341058 (terrain unaware) Anelastic dt at level 0 would be: 0.7810221291 (terrain aware) 0.7810221291 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 33] ADVANCE from elapsed time = 0.96 to 0.99 with dt = 0.03 Making slow rhs at time 0.96 for fast variables advancing from 0.96 to 0.97 No-substepping time integration at level 0 to 0.97 with dt = 0.01 Time integration of scalars at level 0 from 0.96 to 0.97 with dt = 0.01 using RHS created at 0.96 Making slow rhs at time 0.97 for fast variables advancing from 0.96 to 0.975 No-substepping time integration at level 0 to 0.975 with dt = 0.015 Time integration of scalars at level 0 from 0.96 to 0.975 with dt = 0.015 using RHS created at 0.97 Making slow rhs at time 0.975 for fast variables advancing from 0.96 to 0.99 No-substepping time integration at level 0 to 0.99 with dt = 0.03 Time integration of scalars at level 0 from 0.96 to 0.99 with dt = 0.03 using RHS created at 0.975 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 33] Advanced 48000 cells Cloud fraction 0.96 0 Coarse STEP 33 ends. TIME = 0.99 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111857037 seconds. TIME= 0.99 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00033 3DPlotfile write time = 0.012481979 seconds. 1-01-01 00:00:00.990000 (0.99 s elapsed) Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341051 (terrain aware) 0.03471341051 (terrain unaware) Anelastic dt at level 0 would be: 0.7810221103 (terrain aware) 0.7810221103 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 34] ADVANCE from elapsed time = 0.99 to 1.02 with dt = 0.03 Making slow rhs at time 0.99 for fast variables advancing from 0.99 to 1 No-substepping time integration at level 0 to 1 with dt = 0.01 Time integration of scalars at level 0 from 0.99 to 1 with dt = 0.01 using RHS created at 0.99 Making slow rhs at time 1 for fast variables advancing from 0.99 to 1.005 No-substepping time integration at level 0 to 1.005 with dt = 0.015 Time integration of scalars at level 0 from 0.99 to 1.005 with dt = 0.015 using RHS created at 1 Making slow rhs at time 1.005 for fast variables advancing from 0.99 to 1.02 No-substepping time integration at level 0 to 1.02 with dt = 0.03 Time integration of scalars at level 0 from 0.99 to 1.02 with dt = 0.03 using RHS created at 1.005 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 34] Advanced 48000 cells Cloud fraction 0.99 0 Coarse STEP 34 ends. TIME = 1.02 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111579284 seconds. TIME= 1.02 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00034 3DPlotfile write time = 0.012388573 seconds. 1-01-01 00:00:01.020000 (1.02 s elapsed) Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341045 (terrain aware) 0.03471341045 (terrain unaware) Anelastic dt at level 0 would be: 0.7810220914 (terrain aware) 0.7810220914 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 35] ADVANCE from elapsed time = 1.02 to 1.05 with dt = 0.03 Making slow rhs at time 1.02 for fast variables advancing from 1.02 to 1.03 No-substepping time integration at level 0 to 1.03 with dt = 0.01 Time integration of scalars at level 0 from 1.02 to 1.03 with dt = 0.01 using RHS created at 1.02 Making slow rhs at time 1.03 for fast variables advancing from 1.02 to 1.035 No-substepping time integration at level 0 to 1.035 with dt = 0.015 Time integration of scalars at level 0 from 1.02 to 1.035 with dt = 0.015 using RHS created at 1.03 Making slow rhs at time 1.035 for fast variables advancing from 1.02 to 1.05 No-substepping time integration at level 0 to 1.05 with dt = 0.03 Time integration of scalars at level 0 from 1.02 to 1.05 with dt = 0.03 using RHS created at 1.035 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 35] Advanced 48000 cells Cloud fraction 1.02 0 Coarse STEP 35 ends. TIME = 1.05 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111983247 seconds. TIME= 1.05 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00035 3DPlotfile write time = 0.012352525 seconds. 1-01-01 00:00:01.050000 (1.05 s elapsed) Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341038 (terrain aware) 0.03471341038 (terrain unaware) Anelastic dt at level 0 would be: 0.7810220726 (terrain aware) 0.7810220726 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 36] ADVANCE from elapsed time = 1.05 to 1.08 with dt = 0.03 Making slow rhs at time 1.05 for fast variables advancing from 1.05 to 1.06 No-substepping time integration at level 0 to 1.06 with dt = 0.01 Time integration of scalars at level 0 from 1.05 to 1.06 with dt = 0.01 using RHS created at 1.05 Making slow rhs at time 1.06 for fast variables advancing from 1.05 to 1.065 No-substepping time integration at level 0 to 1.065 with dt = 0.015 Time integration of scalars at level 0 from 1.05 to 1.065 with dt = 0.015 using RHS created at 1.06 Making slow rhs at time 1.065 for fast variables advancing from 1.05 to 1.08 No-substepping time integration at level 0 to 1.08 with dt = 0.03 Time integration of scalars at level 0 from 1.05 to 1.08 with dt = 0.03 using RHS created at 1.065 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 36] Advanced 48000 cells Cloud fraction 1.05 0 Coarse STEP 36 ends. TIME = 1.08 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112459007 seconds. TIME= 1.08 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00036 3DPlotfile write time = 0.012411982 seconds. 1-01-01 00:00:01.080000 (1.08 s elapsed) Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341032 (terrain aware) 0.03471341032 (terrain unaware) Anelastic dt at level 0 would be: 0.7810220537 (terrain aware) 0.7810220537 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 37] ADVANCE from elapsed time = 1.08 to 1.11 with dt = 0.03 Making slow rhs at time 1.08 for fast variables advancing from 1.08 to 1.09 No-substepping time integration at level 0 to 1.09 with dt = 0.01 Time integration of scalars at level 0 from 1.08 to 1.09 with dt = 0.01 using RHS created at 1.08 Making slow rhs at time 1.09 for fast variables advancing from 1.08 to 1.095 No-substepping time integration at level 0 to 1.095 with dt = 0.015 Time integration of scalars at level 0 from 1.08 to 1.095 with dt = 0.015 using RHS created at 1.09 Making slow rhs at time 1.095 for fast variables advancing from 1.08 to 1.11 No-substepping time integration at level 0 to 1.11 with dt = 0.03 Time integration of scalars at level 0 from 1.08 to 1.11 with dt = 0.03 using RHS created at 1.095 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 37] Advanced 48000 cells Cloud fraction 1.08 0 Coarse STEP 37 ends. TIME = 1.11 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112214682 seconds. TIME= 1.11 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00037 3DPlotfile write time = 0.012689641 seconds. 1-01-01 00:00:01.110000 (1.11 s elapsed) Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341025 (terrain aware) 0.03471341025 (terrain unaware) Anelastic dt at level 0 would be: 0.7810220349 (terrain aware) 0.7810220349 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 38] ADVANCE from elapsed time = 1.11 to 1.14 with dt = 0.03 Making slow rhs at time 1.11 for fast variables advancing from 1.11 to 1.12 No-substepping time integration at level 0 to 1.12 with dt = 0.01 Time integration of scalars at level 0 from 1.11 to 1.12 with dt = 0.01 using RHS created at 1.11 Making slow rhs at time 1.12 for fast variables advancing from 1.11 to 1.125 No-substepping time integration at level 0 to 1.125 with dt = 0.015 Time integration of scalars at level 0 from 1.11 to 1.125 with dt = 0.015 using RHS created at 1.12 Making slow rhs at time 1.125 for fast variables advancing from 1.11 to 1.14 No-substepping time integration at level 0 to 1.14 with dt = 0.03 Time integration of scalars at level 0 from 1.11 to 1.14 with dt = 0.03 using RHS created at 1.125 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 38] Advanced 48000 cells Cloud fraction 1.11 0 Coarse STEP 38 ends. TIME = 1.14 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111908325 seconds. TIME= 1.14 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00038 3DPlotfile write time = 0.012503178 seconds. 1-01-01 00:00:01.140000 (1.14 s elapsed) Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341019 (terrain aware) 0.03471341019 (terrain unaware) Anelastic dt at level 0 would be: 0.781022016 (terrain aware) 0.781022016 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 39] ADVANCE from elapsed time = 1.14 to 1.17 with dt = 0.03 Making slow rhs at time 1.14 for fast variables advancing from 1.14 to 1.15 No-substepping time integration at level 0 to 1.15 with dt = 0.01 Time integration of scalars at level 0 from 1.14 to 1.15 with dt = 0.01 using RHS created at 1.14 Making slow rhs at time 1.15 for fast variables advancing from 1.14 to 1.155 No-substepping time integration at level 0 to 1.155 with dt = 0.015 Time integration of scalars at level 0 from 1.14 to 1.155 with dt = 0.015 using RHS created at 1.15 Making slow rhs at time 1.155 for fast variables advancing from 1.14 to 1.17 No-substepping time integration at level 0 to 1.17 with dt = 0.03 Time integration of scalars at level 0 from 1.14 to 1.17 with dt = 0.03 using RHS created at 1.155 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 39] Advanced 48000 cells Cloud fraction 1.14 0 Coarse STEP 39 ends. TIME = 1.17 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112730985 seconds. TIME= 1.17 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00039 3DPlotfile write time = 0.012752886 seconds. 1-01-01 00:00:01.170000 (1.17 s elapsed) Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341012 (terrain aware) 0.03471341012 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219972 (terrain aware) 0.7810219972 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 40] ADVANCE from elapsed time = 1.17 to 1.2 with dt = 0.03 Making slow rhs at time 1.17 for fast variables advancing from 1.17 to 1.18 No-substepping time integration at level 0 to 1.18 with dt = 0.01 Time integration of scalars at level 0 from 1.17 to 1.18 with dt = 0.01 using RHS created at 1.17 Making slow rhs at time 1.18 for fast variables advancing from 1.17 to 1.185 No-substepping time integration at level 0 to 1.185 with dt = 0.015 Time integration of scalars at level 0 from 1.17 to 1.185 with dt = 0.015 using RHS created at 1.18 Making slow rhs at time 1.185 for fast variables advancing from 1.17 to 1.2 No-substepping time integration at level 0 to 1.2 with dt = 0.03 Time integration of scalars at level 0 from 1.17 to 1.2 with dt = 0.03 using RHS created at 1.185 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 40] Advanced 48000 cells Cloud fraction 1.17 0 Coarse STEP 40 ends. TIME = 1.2 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111798168 seconds. TIME= 1.2 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00040 3DPlotfile write time = 0.014233876 seconds. 1-01-01 00:00:01.200000 (1.2 s elapsed) Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341006 (terrain aware) 0.03471341006 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219783 (terrain aware) 0.7810219783 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 41] ADVANCE from elapsed time = 1.2 to 1.23 with dt = 0.03 Making slow rhs at time 1.2 for fast variables advancing from 1.2 to 1.21 No-substepping time integration at level 0 to 1.21 with dt = 0.01 Time integration of scalars at level 0 from 1.2 to 1.21 with dt = 0.01 using RHS created at 1.2 Making slow rhs at time 1.21 for fast variables advancing from 1.2 to 1.215 No-substepping time integration at level 0 to 1.215 with dt = 0.015 Time integration of scalars at level 0 from 1.2 to 1.215 with dt = 0.015 using RHS created at 1.21 Making slow rhs at time 1.215 for fast variables advancing from 1.2 to 1.23 No-substepping time integration at level 0 to 1.23 with dt = 0.03 Time integration of scalars at level 0 from 1.2 to 1.23 with dt = 0.03 using RHS created at 1.215 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 41] Advanced 48000 cells Cloud fraction 1.2 0 Coarse STEP 41 ends. TIME = 1.23 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111705311 seconds. TIME= 1.23 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00041 3DPlotfile write time = 0.012421638 seconds. 1-01-01 00:00:01.230000 (1.23 s elapsed) Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340999 (terrain aware) 0.03471340999 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219594 (terrain aware) 0.7810219594 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 42] ADVANCE from elapsed time = 1.23 to 1.26 with dt = 0.03 Making slow rhs at time 1.23 for fast variables advancing from 1.23 to 1.24 No-substepping time integration at level 0 to 1.24 with dt = 0.01 Time integration of scalars at level 0 from 1.23 to 1.24 with dt = 0.01 using RHS created at 1.23 Making slow rhs at time 1.24 for fast variables advancing from 1.23 to 1.245 No-substepping time integration at level 0 to 1.245 with dt = 0.015 Time integration of scalars at level 0 from 1.23 to 1.245 with dt = 0.015 using RHS created at 1.24 Making slow rhs at time 1.245 for fast variables advancing from 1.23 to 1.26 No-substepping time integration at level 0 to 1.26 with dt = 0.03 Time integration of scalars at level 0 from 1.23 to 1.26 with dt = 0.03 using RHS created at 1.245 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 42] Advanced 48000 cells Cloud fraction 1.23 0 Coarse STEP 42 ends. TIME = 1.26 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110878182 seconds. TIME= 1.26 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00042 3DPlotfile write time = 0.011702901 seconds. 1-01-01 00:00:01.260000 (1.26 s elapsed) Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340993 (terrain aware) 0.03471340993 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219405 (terrain aware) 0.7810219405 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 43] ADVANCE from elapsed time = 1.26 to 1.29 with dt = 0.03 Making slow rhs at time 1.26 for fast variables advancing from 1.26 to 1.27 No-substepping time integration at level 0 to 1.27 with dt = 0.01 Time integration of scalars at level 0 from 1.26 to 1.27 with dt = 0.01 using RHS created at 1.26 Making slow rhs at time 1.27 for fast variables advancing from 1.26 to 1.275 No-substepping time integration at level 0 to 1.275 with dt = 0.015 Time integration of scalars at level 0 from 1.26 to 1.275 with dt = 0.015 using RHS created at 1.27 Making slow rhs at time 1.275 for fast variables advancing from 1.26 to 1.29 No-substepping time integration at level 0 to 1.29 with dt = 0.03 Time integration of scalars at level 0 from 1.26 to 1.29 with dt = 0.03 using RHS created at 1.275 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 43] Advanced 48000 cells Cloud fraction 1.26 0 Coarse STEP 43 ends. TIME = 1.29 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111537844 seconds. TIME= 1.29 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00043 3DPlotfile write time = 0.011757084 seconds. 1-01-01 00:00:01.290000 (1.29 s elapsed) Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340986 (terrain aware) 0.03471340986 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219217 (terrain aware) 0.7810219217 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 44] ADVANCE from elapsed time = 1.29 to 1.32 with dt = 0.03 Making slow rhs at time 1.29 for fast variables advancing from 1.29 to 1.3 No-substepping time integration at level 0 to 1.3 with dt = 0.01 Time integration of scalars at level 0 from 1.29 to 1.3 with dt = 0.01 using RHS created at 1.29 Making slow rhs at time 1.3 for fast variables advancing from 1.29 to 1.305 No-substepping time integration at level 0 to 1.305 with dt = 0.015 Time integration of scalars at level 0 from 1.29 to 1.305 with dt = 0.015 using RHS created at 1.3 Making slow rhs at time 1.305 for fast variables advancing from 1.29 to 1.32 No-substepping time integration at level 0 to 1.32 with dt = 0.03 Time integration of scalars at level 0 from 1.29 to 1.32 with dt = 0.03 using RHS created at 1.305 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 44] Advanced 48000 cells Cloud fraction 1.29 0 Coarse STEP 44 ends. TIME = 1.32 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111926929 seconds. TIME= 1.32 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00044 3DPlotfile write time = 0.012380157 seconds. 1-01-01 00:00:01.320000 (1.32 s elapsed) Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134098 (terrain aware) 0.0347134098 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219028 (terrain aware) 0.7810219028 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 45] ADVANCE from elapsed time = 1.32 to 1.35 with dt = 0.03 Making slow rhs at time 1.32 for fast variables advancing from 1.32 to 1.33 No-substepping time integration at level 0 to 1.33 with dt = 0.01 Time integration of scalars at level 0 from 1.32 to 1.33 with dt = 0.01 using RHS created at 1.32 Making slow rhs at time 1.33 for fast variables advancing from 1.32 to 1.335 No-substepping time integration at level 0 to 1.335 with dt = 0.015 Time integration of scalars at level 0 from 1.32 to 1.335 with dt = 0.015 using RHS created at 1.33 Making slow rhs at time 1.335 for fast variables advancing from 1.32 to 1.35 No-substepping time integration at level 0 to 1.35 with dt = 0.03 Time integration of scalars at level 0 from 1.32 to 1.35 with dt = 0.03 using RHS created at 1.335 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 45] Advanced 48000 cells Cloud fraction 1.32 0 Coarse STEP 45 ends. TIME = 1.35 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111493297 seconds. TIME= 1.35 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00045 3DPlotfile write time = 0.012621864 seconds. 1-01-01 00:00:01.350000 (1.35 s elapsed) Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340973 (terrain aware) 0.03471340973 (terrain unaware) Anelastic dt at level 0 would be: 0.7810218839 (terrain aware) 0.7810218839 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 46] ADVANCE from elapsed time = 1.35 to 1.38 with dt = 0.03 Making slow rhs at time 1.35 for fast variables advancing from 1.35 to 1.36 No-substepping time integration at level 0 to 1.36 with dt = 0.01 Time integration of scalars at level 0 from 1.35 to 1.36 with dt = 0.01 using RHS created at 1.35 Making slow rhs at time 1.36 for fast variables advancing from 1.35 to 1.365 No-substepping time integration at level 0 to 1.365 with dt = 0.015 Time integration of scalars at level 0 from 1.35 to 1.365 with dt = 0.015 using RHS created at 1.36 Making slow rhs at time 1.365 for fast variables advancing from 1.35 to 1.38 No-substepping time integration at level 0 to 1.38 with dt = 0.03 Time integration of scalars at level 0 from 1.35 to 1.38 with dt = 0.03 using RHS created at 1.365 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 46] Advanced 48000 cells Cloud fraction 1.35 0 Coarse STEP 46 ends. TIME = 1.38 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111417988 seconds. TIME= 1.38 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00046 3DPlotfile write time = 0.012424297 seconds. 1-01-01 00:00:01.380000 (1.38 s elapsed) Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340967 (terrain aware) 0.03471340967 (terrain unaware) Anelastic dt at level 0 would be: 0.781021865 (terrain aware) 0.781021865 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 47] ADVANCE from elapsed time = 1.38 to 1.41 with dt = 0.03 Making slow rhs at time 1.38 for fast variables advancing from 1.38 to 1.39 No-substepping time integration at level 0 to 1.39 with dt = 0.01 Time integration of scalars at level 0 from 1.38 to 1.39 with dt = 0.01 using RHS created at 1.38 Making slow rhs at time 1.39 for fast variables advancing from 1.38 to 1.395 No-substepping time integration at level 0 to 1.395 with dt = 0.015 Time integration of scalars at level 0 from 1.38 to 1.395 with dt = 0.015 using RHS created at 1.39 Making slow rhs at time 1.395 for fast variables advancing from 1.38 to 1.41 No-substepping time integration at level 0 to 1.41 with dt = 0.03 Time integration of scalars at level 0 from 1.38 to 1.41 with dt = 0.03 using RHS created at 1.395 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 47] Advanced 48000 cells Cloud fraction 1.38 0 Coarse STEP 47 ends. TIME = 1.41 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111824712 seconds. TIME= 1.41 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00047 3DPlotfile write time = 0.012659675 seconds. 1-01-01 00:00:01.410000 (1.41 s elapsed) Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134096 (terrain aware) 0.0347134096 (terrain unaware) Anelastic dt at level 0 would be: 0.7810218461 (terrain aware) 0.7810218461 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 48] ADVANCE from elapsed time = 1.41 to 1.44 with dt = 0.03 Making slow rhs at time 1.41 for fast variables advancing from 1.41 to 1.42 No-substepping time integration at level 0 to 1.42 with dt = 0.01 Time integration of scalars at level 0 from 1.41 to 1.42 with dt = 0.01 using RHS created at 1.41 Making slow rhs at time 1.42 for fast variables advancing from 1.41 to 1.425 No-substepping time integration at level 0 to 1.425 with dt = 0.015 Time integration of scalars at level 0 from 1.41 to 1.425 with dt = 0.015 using RHS created at 1.42 Making slow rhs at time 1.425 for fast variables advancing from 1.41 to 1.44 No-substepping time integration at level 0 to 1.44 with dt = 0.03 Time integration of scalars at level 0 from 1.41 to 1.44 with dt = 0.03 using RHS created at 1.425 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 48] Advanced 48000 cells Cloud fraction 1.41 0 Coarse STEP 48 ends. TIME = 1.44 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112580965 seconds. TIME= 1.44 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00048 3DPlotfile write time = 0.01187035 seconds. 1-01-01 00:00:01.440000 (1.44 s elapsed) Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340953 (terrain aware) 0.03471340953 (terrain unaware) Anelastic dt at level 0 would be: 0.7810218273 (terrain aware) 0.7810218273 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 49] ADVANCE from elapsed time = 1.44 to 1.47 with dt = 0.03 Making slow rhs at time 1.44 for fast variables advancing from 1.44 to 1.45 No-substepping time integration at level 0 to 1.45 with dt = 0.01 Time integration of scalars at level 0 from 1.44 to 1.45 with dt = 0.01 using RHS created at 1.44 Making slow rhs at time 1.45 for fast variables advancing from 1.44 to 1.455 No-substepping time integration at level 0 to 1.455 with dt = 0.015 Time integration of scalars at level 0 from 1.44 to 1.455 with dt = 0.015 using RHS created at 1.45 Making slow rhs at time 1.455 for fast variables advancing from 1.44 to 1.47 No-substepping time integration at level 0 to 1.47 with dt = 0.03 Time integration of scalars at level 0 from 1.44 to 1.47 with dt = 0.03 using RHS created at 1.455 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 49] Advanced 48000 cells Cloud fraction 1.44 0 Coarse STEP 49 ends. TIME = 1.47 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112705667 seconds. TIME= 1.47 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00049 3DPlotfile write time = 0.01163222 seconds. 1-01-01 00:00:01.470000 (1.47 s elapsed) Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340947 (terrain aware) 0.03471340947 (terrain unaware) Anelastic dt at level 0 would be: 0.7810218084 (terrain aware) 0.7810218084 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 50] ADVANCE from elapsed time = 1.47 to 1.5 with dt = 0.03 Making slow rhs at time 1.47 for fast variables advancing from 1.47 to 1.48 No-substepping time integration at level 0 to 1.48 with dt = 0.01 Time integration of scalars at level 0 from 1.47 to 1.48 with dt = 0.01 using RHS created at 1.47 Making slow rhs at time 1.48 for fast variables advancing from 1.47 to 1.485 No-substepping time integration at level 0 to 1.485 with dt = 0.015 Time integration of scalars at level 0 from 1.47 to 1.485 with dt = 0.015 using RHS created at 1.48 Making slow rhs at time 1.485 for fast variables advancing from 1.47 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.03 Time integration of scalars at level 0 from 1.47 to 1.5 with dt = 0.03 using RHS created at 1.485 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 50] Advanced 48000 cells Cloud fraction 1.47 0 Coarse STEP 50 ends. TIME = 1.5 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.112206332 seconds. TIME= 1.5 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00050 3DPlotfile write time = 0.012655339 seconds. Writing native checkpoint EkmanSpiral_ideal_restart_chk00050 Writing Lat/Lon variables at level 0 Checkpoint write time = 0.010575405 seconds. Total Time: 7.434530149 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [1] AMReX (26.10-76-g347a3a2d2675) finalized Initializing AMReX (26.10-76-g347a3a2d2675)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.10-76-g347a3a2d2675) initialized Successfully read inputs file ... ERF git hash: 92410d578 AMReX git hash: 26.10-76-g347a3a2d2 Problem name (from inputs file) is: "Ekman Spiral" Reading NC init file names at level 0 and index 0 : wrfinput_ekman_d01 Level 0 is land Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) PBL thermal stratification variable: thetav Thermal stratification based on gradient of potential temperature Reading Times wrfinput datetime 0 : 0001-01-01_00:00:00 -62135596800 Have read start_time string at level 0 is 0001-01-01_00:00:00 Have read start_time number at level 0 is -6.21355968e+10 Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time -6.21355968e+10 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac at level 0 : 1 1 0 (theta = 1, moisture = 1, tke = 1, momenta = 1) use_coriolis : 1 use_gravity : 1 Moisture Model: Saturation Adjustment Terrain Type: StaticFittedMesh Flat fitted terrain: false Buildings Type: None Mesh Type: VariableDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 WRF lateral boundary density forcing: disabled WRF lateral boundary cloud-water/cloud-ice forcing: disabled Restart from native checkpoint EkmanSpiral_ideal_restart_chk00025 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (5,4,399) (0,0,0)) ((0,5,0) (5,9,399) (0,0,0)) ((6,0,0) (11,4,399) (0,0,0)) ((6,5,0) (11,9,399) (0,0,0)) ) Reading SST data Reading TSK data Reading LMASK data Reading LANDTYPE data Reading SOILTYPE data Reading Urban fraction Reading Lat/Lon variables Reading T00 from wrfinput Reading P00 from wrfinput Reading TLP from wrfinput Reading TISO from wrfinput Reading TLP_STRAT from wrfinput Reading P_STRAT from wrfinput WARNING: WRF base state parameters read from wrfinput_ekman_d01 are invalid: (T00, P00, TLP, TISO, TLP_STRAT, P_STRAT) = (0, 0, 0, 0, 0, 0) T00, P00 and TLP must all be positive and finite; reverting to ERF defaults. NOTE: the base state is built entirely from these six parameters -- PB and ALB in the file are not used -- so the resulting base state is synthetic and may be inconsistent with the state read from wrfinput_ekman_d01. WRF base state parameters (T00, P00, TLP, TISO, TLP_STRAT, P_STRAT) are: (290, 100000, 50, 200, -11, 0) Base state layer interfaces: z_iso = 12901.83486 m Restart time = 0.068448869 seconds. smallest grid spacing at level 0 = 11.61203491 dt at level 0 = 0.03 Viscous CFL is 0.0005562174344 Max value of |p_hse - p_eos| is 4.365574569e-11, less than the tolerance 9.992071048e-09 Min/max value of dp0/dx are zero Min/max value of dp0/dy are zero Min/max value of dp0/dz + rho0*|g| are less than 1e-08 Min/max value of x-gradient of full (moist) pressure are zero Min/max value of y-gradient of full (moist) pressure are zero Min/max value of moist dp/dz + rho_m*|g| are -2.178346392e-11 2.972733171e-11 with min at face (5,4,131) with max at face (5,4,18) Min/max value of -dp'/dz + buoyancy are -2.909811281e-11 2.238347008e-11 with min at face (5,4,257) with max at face (5,4,131) Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00025 3DPlotfile write time = 0.013095686 seconds. TIME= 0.75 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 1-01-01 00:00:00.750000 (0.75 s elapsed) Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341103 (terrain aware) 0.03471341103 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222609 (terrain aware) 0.7810222609 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 26] ADVANCE from elapsed time = 0.75 to 0.78 with dt = 0.03 Making slow rhs at time 0.75 for fast variables advancing from 0.75 to 0.76 No-substepping time integration at level 0 to 0.76 with dt = 0.01 Time integration of scalars at level 0 from 0.75 to 0.76 with dt = 0.01 using RHS created at 0.75 Making slow rhs at time 0.76 for fast variables advancing from 0.75 to 0.765 No-substepping time integration at level 0 to 0.765 with dt = 0.015 Time integration of scalars at level 0 from 0.75 to 0.765 with dt = 0.015 using RHS created at 0.76 Making slow rhs at time 0.765 for fast variables advancing from 0.75 to 0.78 No-substepping time integration at level 0 to 0.78 with dt = 0.03 Time integration of scalars at level 0 from 0.75 to 0.78 with dt = 0.03 using RHS created at 0.765 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 26] Advanced 48000 cells Cloud fraction 0.75 0 Coarse STEP 26 ends. TIME = 0.78 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111107062 seconds. TIME= 0.78 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00026 3DPlotfile write time = 0.013816081 seconds. 1-01-01 00:00:00.780000 (0.78 s elapsed) Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341097 (terrain aware) 0.03471341097 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222421 (terrain aware) 0.7810222421 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 27] ADVANCE from elapsed time = 0.78 to 0.81 with dt = 0.03 Making slow rhs at time 0.78 for fast variables advancing from 0.78 to 0.79 No-substepping time integration at level 0 to 0.79 with dt = 0.01 Time integration of scalars at level 0 from 0.78 to 0.79 with dt = 0.01 using RHS created at 0.78 Making slow rhs at time 0.79 for fast variables advancing from 0.78 to 0.795 No-substepping time integration at level 0 to 0.795 with dt = 0.015 Time integration of scalars at level 0 from 0.78 to 0.795 with dt = 0.015 using RHS created at 0.79 Making slow rhs at time 0.795 for fast variables advancing from 0.78 to 0.81 No-substepping time integration at level 0 to 0.81 with dt = 0.03 Time integration of scalars at level 0 from 0.78 to 0.81 with dt = 0.03 using RHS created at 0.795 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 27] Advanced 48000 cells Cloud fraction 0.78 0 Coarse STEP 27 ends. TIME = 0.81 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110785341 seconds. TIME= 0.81 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00027 3DPlotfile write time = 0.013556136 seconds. 1-01-01 00:00:00.810000 (0.81 s elapsed) Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134109 (terrain aware) 0.0347134109 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222233 (terrain aware) 0.7810222233 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 28] ADVANCE from elapsed time = 0.81 to 0.84 with dt = 0.03 Making slow rhs at time 0.81 for fast variables advancing from 0.81 to 0.82 No-substepping time integration at level 0 to 0.82 with dt = 0.01 Time integration of scalars at level 0 from 0.81 to 0.82 with dt = 0.01 using RHS created at 0.81 Making slow rhs at time 0.82 for fast variables advancing from 0.81 to 0.825 No-substepping time integration at level 0 to 0.825 with dt = 0.015 Time integration of scalars at level 0 from 0.81 to 0.825 with dt = 0.015 using RHS created at 0.82 Making slow rhs at time 0.825 for fast variables advancing from 0.81 to 0.84 No-substepping time integration at level 0 to 0.84 with dt = 0.03 Time integration of scalars at level 0 from 0.81 to 0.84 with dt = 0.03 using RHS created at 0.825 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 28] Advanced 48000 cells Cloud fraction 0.81 0 Coarse STEP 28 ends. TIME = 0.84 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.11049044 seconds. TIME= 0.84 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00028 3DPlotfile write time = 0.013590885 seconds. 1-01-01 00:00:00.840000 (0.84 s elapsed) Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341084 (terrain aware) 0.03471341084 (terrain unaware) Anelastic dt at level 0 would be: 0.7810222045 (terrain aware) 0.7810222045 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 29] ADVANCE from elapsed time = 0.84 to 0.87 with dt = 0.03 Making slow rhs at time 0.84 for fast variables advancing from 0.84 to 0.85 No-substepping time integration at level 0 to 0.85 with dt = 0.01 Time integration of scalars at level 0 from 0.84 to 0.85 with dt = 0.01 using RHS created at 0.84 Making slow rhs at time 0.85 for fast variables advancing from 0.84 to 0.855 No-substepping time integration at level 0 to 0.855 with dt = 0.015 Time integration of scalars at level 0 from 0.84 to 0.855 with dt = 0.015 using RHS created at 0.85 Making slow rhs at time 0.855 for fast variables advancing from 0.84 to 0.87 No-substepping time integration at level 0 to 0.87 with dt = 0.03 Time integration of scalars at level 0 from 0.84 to 0.87 with dt = 0.03 using RHS created at 0.855 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 29] Advanced 48000 cells Cloud fraction 0.84 0 Coarse STEP 29 ends. TIME = 0.87 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110543006 seconds. TIME= 0.87 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00029 3DPlotfile write time = 0.013570418 seconds. 1-01-01 00:00:00.870000 (0.87 s elapsed) Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341077 (terrain aware) 0.03471341077 (terrain unaware) Anelastic dt at level 0 would be: 0.7810221856 (terrain aware) 0.7810221856 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 30] ADVANCE from elapsed time = 0.87 to 0.9 with dt = 0.03 Making slow rhs at time 0.87 for fast variables advancing from 0.87 to 0.88 No-substepping time integration at level 0 to 0.88 with dt = 0.01 Time integration of scalars at level 0 from 0.87 to 0.88 with dt = 0.01 using RHS created at 0.87 Making slow rhs at time 0.88 for fast variables advancing from 0.87 to 0.885 No-substepping time integration at level 0 to 0.885 with dt = 0.015 Time integration of scalars at level 0 from 0.87 to 0.885 with dt = 0.015 using RHS created at 0.88 Making slow rhs at time 0.885 for fast variables advancing from 0.87 to 0.9 No-substepping time integration at level 0 to 0.9 with dt = 0.03 Time integration of scalars at level 0 from 0.87 to 0.9 with dt = 0.03 using RHS created at 0.885 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 30] Advanced 48000 cells Cloud fraction 0.87 0 Coarse STEP 30 ends. TIME = 0.9 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110558325 seconds. TIME= 0.9 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00030 3DPlotfile write time = 0.01435979 seconds. 1-01-01 00:00:00.900000 (0.9 s elapsed) Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341071 (terrain aware) 0.03471341071 (terrain unaware) Anelastic dt at level 0 would be: 0.7810221668 (terrain aware) 0.7810221668 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 31] ADVANCE from elapsed time = 0.9 to 0.93 with dt = 0.03 Making slow rhs at time 0.9 for fast variables advancing from 0.9 to 0.91 No-substepping time integration at level 0 to 0.91 with dt = 0.01 Time integration of scalars at level 0 from 0.9 to 0.91 with dt = 0.01 using RHS created at 0.9 Making slow rhs at time 0.91 for fast variables advancing from 0.9 to 0.915 No-substepping time integration at level 0 to 0.915 with dt = 0.015 Time integration of scalars at level 0 from 0.9 to 0.915 with dt = 0.015 using RHS created at 0.91 Making slow rhs at time 0.915 for fast variables advancing from 0.9 to 0.93 No-substepping time integration at level 0 to 0.93 with dt = 0.03 Time integration of scalars at level 0 from 0.9 to 0.93 with dt = 0.03 using RHS created at 0.915 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 31] Advanced 48000 cells Cloud fraction 0.9 0 Coarse STEP 31 ends. TIME = 0.93 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.11069088 seconds. TIME= 0.93 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00031 3DPlotfile write time = 0.014499415 seconds. 1-01-01 00:00:00.930000 (0.93 s elapsed) Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341064 (terrain aware) 0.03471341064 (terrain unaware) Anelastic dt at level 0 would be: 0.781022148 (terrain aware) 0.781022148 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 32] ADVANCE from elapsed time = 0.93 to 0.96 with dt = 0.03 Making slow rhs at time 0.93 for fast variables advancing from 0.93 to 0.94 No-substepping time integration at level 0 to 0.94 with dt = 0.01 Time integration of scalars at level 0 from 0.93 to 0.94 with dt = 0.01 using RHS created at 0.93 Making slow rhs at time 0.94 for fast variables advancing from 0.93 to 0.945 No-substepping time integration at level 0 to 0.945 with dt = 0.015 Time integration of scalars at level 0 from 0.93 to 0.945 with dt = 0.015 using RHS created at 0.94 Making slow rhs at time 0.945 for fast variables advancing from 0.93 to 0.96 No-substepping time integration at level 0 to 0.96 with dt = 0.03 Time integration of scalars at level 0 from 0.93 to 0.96 with dt = 0.03 using RHS created at 0.945 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 32] Advanced 48000 cells Cloud fraction 0.93 0 Coarse STEP 32 ends. TIME = 0.96 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110304187 seconds. TIME= 0.96 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00032 3DPlotfile write time = 0.013625075 seconds. 1-01-01 00:00:00.960000 (0.96 s elapsed) Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341058 (terrain aware) 0.03471341058 (terrain unaware) Anelastic dt at level 0 would be: 0.7810221291 (terrain aware) 0.7810221291 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 33] ADVANCE from elapsed time = 0.96 to 0.99 with dt = 0.03 Making slow rhs at time 0.96 for fast variables advancing from 0.96 to 0.97 No-substepping time integration at level 0 to 0.97 with dt = 0.01 Time integration of scalars at level 0 from 0.96 to 0.97 with dt = 0.01 using RHS created at 0.96 Making slow rhs at time 0.97 for fast variables advancing from 0.96 to 0.975 No-substepping time integration at level 0 to 0.975 with dt = 0.015 Time integration of scalars at level 0 from 0.96 to 0.975 with dt = 0.015 using RHS created at 0.97 Making slow rhs at time 0.975 for fast variables advancing from 0.96 to 0.99 No-substepping time integration at level 0 to 0.99 with dt = 0.03 Time integration of scalars at level 0 from 0.96 to 0.99 with dt = 0.03 using RHS created at 0.975 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 33] Advanced 48000 cells Cloud fraction 0.96 0 Coarse STEP 33 ends. TIME = 0.99 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.1106006 seconds. TIME= 0.99 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00033 3DPlotfile write time = 0.014351182 seconds. 1-01-01 00:00:00.990000 (0.99 s elapsed) Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341051 (terrain aware) 0.03471341051 (terrain unaware) Anelastic dt at level 0 would be: 0.7810221103 (terrain aware) 0.7810221103 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 34] ADVANCE from elapsed time = 0.99 to 1.02 with dt = 0.03 Making slow rhs at time 0.99 for fast variables advancing from 0.99 to 1 No-substepping time integration at level 0 to 1 with dt = 0.01 Time integration of scalars at level 0 from 0.99 to 1 with dt = 0.01 using RHS created at 0.99 Making slow rhs at time 1 for fast variables advancing from 0.99 to 1.005 No-substepping time integration at level 0 to 1.005 with dt = 0.015 Time integration of scalars at level 0 from 0.99 to 1.005 with dt = 0.015 using RHS created at 1 Making slow rhs at time 1.005 for fast variables advancing from 0.99 to 1.02 No-substepping time integration at level 0 to 1.02 with dt = 0.03 Time integration of scalars at level 0 from 0.99 to 1.02 with dt = 0.03 using RHS created at 1.005 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 34] Advanced 48000 cells Cloud fraction 0.99 0 Coarse STEP 34 ends. TIME = 1.02 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110743063 seconds. TIME= 1.02 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00034 3DPlotfile write time = 0.01424616 seconds. 1-01-01 00:00:01.020000 (1.02 s elapsed) Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341045 (terrain aware) 0.03471341045 (terrain unaware) Anelastic dt at level 0 would be: 0.7810220914 (terrain aware) 0.7810220914 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 35] ADVANCE from elapsed time = 1.02 to 1.05 with dt = 0.03 Making slow rhs at time 1.02 for fast variables advancing from 1.02 to 1.03 No-substepping time integration at level 0 to 1.03 with dt = 0.01 Time integration of scalars at level 0 from 1.02 to 1.03 with dt = 0.01 using RHS created at 1.02 Making slow rhs at time 1.03 for fast variables advancing from 1.02 to 1.035 No-substepping time integration at level 0 to 1.035 with dt = 0.015 Time integration of scalars at level 0 from 1.02 to 1.035 with dt = 0.015 using RHS created at 1.03 Making slow rhs at time 1.035 for fast variables advancing from 1.02 to 1.05 No-substepping time integration at level 0 to 1.05 with dt = 0.03 Time integration of scalars at level 0 from 1.02 to 1.05 with dt = 0.03 using RHS created at 1.035 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 35] Advanced 48000 cells Cloud fraction 1.02 0 Coarse STEP 35 ends. TIME = 1.05 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110495179 seconds. TIME= 1.05 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00035 3DPlotfile write time = 0.01364878 seconds. 1-01-01 00:00:01.050000 (1.05 s elapsed) Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341038 (terrain aware) 0.03471341038 (terrain unaware) Anelastic dt at level 0 would be: 0.7810220726 (terrain aware) 0.7810220726 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 36] ADVANCE from elapsed time = 1.05 to 1.08 with dt = 0.03 Making slow rhs at time 1.05 for fast variables advancing from 1.05 to 1.06 No-substepping time integration at level 0 to 1.06 with dt = 0.01 Time integration of scalars at level 0 from 1.05 to 1.06 with dt = 0.01 using RHS created at 1.05 Making slow rhs at time 1.06 for fast variables advancing from 1.05 to 1.065 No-substepping time integration at level 0 to 1.065 with dt = 0.015 Time integration of scalars at level 0 from 1.05 to 1.065 with dt = 0.015 using RHS created at 1.06 Making slow rhs at time 1.065 for fast variables advancing from 1.05 to 1.08 No-substepping time integration at level 0 to 1.08 with dt = 0.03 Time integration of scalars at level 0 from 1.05 to 1.08 with dt = 0.03 using RHS created at 1.065 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 36] Advanced 48000 cells Cloud fraction 1.05 0 Coarse STEP 36 ends. TIME = 1.08 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111079726 seconds. TIME= 1.08 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00036 3DPlotfile write time = 0.014264933 seconds. 1-01-01 00:00:01.080000 (1.08 s elapsed) Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341032 (terrain aware) 0.03471341032 (terrain unaware) Anelastic dt at level 0 would be: 0.7810220537 (terrain aware) 0.7810220537 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 37] ADVANCE from elapsed time = 1.08 to 1.11 with dt = 0.03 Making slow rhs at time 1.08 for fast variables advancing from 1.08 to 1.09 No-substepping time integration at level 0 to 1.09 with dt = 0.01 Time integration of scalars at level 0 from 1.08 to 1.09 with dt = 0.01 using RHS created at 1.08 Making slow rhs at time 1.09 for fast variables advancing from 1.08 to 1.095 No-substepping time integration at level 0 to 1.095 with dt = 0.015 Time integration of scalars at level 0 from 1.08 to 1.095 with dt = 0.015 using RHS created at 1.09 Making slow rhs at time 1.095 for fast variables advancing from 1.08 to 1.11 No-substepping time integration at level 0 to 1.11 with dt = 0.03 Time integration of scalars at level 0 from 1.08 to 1.11 with dt = 0.03 using RHS created at 1.095 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 37] Advanced 48000 cells Cloud fraction 1.08 0 Coarse STEP 37 ends. TIME = 1.11 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110406958 seconds. TIME= 1.11 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00037 3DPlotfile write time = 0.014374059 seconds. 1-01-01 00:00:01.110000 (1.11 s elapsed) Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341025 (terrain aware) 0.03471341025 (terrain unaware) Anelastic dt at level 0 would be: 0.7810220349 (terrain aware) 0.7810220349 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 38] ADVANCE from elapsed time = 1.11 to 1.14 with dt = 0.03 Making slow rhs at time 1.11 for fast variables advancing from 1.11 to 1.12 No-substepping time integration at level 0 to 1.12 with dt = 0.01 Time integration of scalars at level 0 from 1.11 to 1.12 with dt = 0.01 using RHS created at 1.11 Making slow rhs at time 1.12 for fast variables advancing from 1.11 to 1.125 No-substepping time integration at level 0 to 1.125 with dt = 0.015 Time integration of scalars at level 0 from 1.11 to 1.125 with dt = 0.015 using RHS created at 1.12 Making slow rhs at time 1.125 for fast variables advancing from 1.11 to 1.14 No-substepping time integration at level 0 to 1.14 with dt = 0.03 Time integration of scalars at level 0 from 1.11 to 1.14 with dt = 0.03 using RHS created at 1.125 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 38] Advanced 48000 cells Cloud fraction 1.11 0 Coarse STEP 38 ends. TIME = 1.14 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110155343 seconds. TIME= 1.14 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00038 3DPlotfile write time = 0.014278887 seconds. 1-01-01 00:00:01.140000 (1.14 s elapsed) Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341019 (terrain aware) 0.03471341019 (terrain unaware) Anelastic dt at level 0 would be: 0.781022016 (terrain aware) 0.781022016 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 39] ADVANCE from elapsed time = 1.14 to 1.17 with dt = 0.03 Making slow rhs at time 1.14 for fast variables advancing from 1.14 to 1.15 No-substepping time integration at level 0 to 1.15 with dt = 0.01 Time integration of scalars at level 0 from 1.14 to 1.15 with dt = 0.01 using RHS created at 1.14 Making slow rhs at time 1.15 for fast variables advancing from 1.14 to 1.155 No-substepping time integration at level 0 to 1.155 with dt = 0.015 Time integration of scalars at level 0 from 1.14 to 1.155 with dt = 0.015 using RHS created at 1.15 Making slow rhs at time 1.155 for fast variables advancing from 1.14 to 1.17 No-substepping time integration at level 0 to 1.17 with dt = 0.03 Time integration of scalars at level 0 from 1.14 to 1.17 with dt = 0.03 using RHS created at 1.155 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 39] Advanced 48000 cells Cloud fraction 1.14 0 Coarse STEP 39 ends. TIME = 1.17 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.111141033 seconds. TIME= 1.17 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00039 3DPlotfile write time = 0.014313899 seconds. 1-01-01 00:00:01.170000 (1.17 s elapsed) Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341012 (terrain aware) 0.03471341012 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219972 (terrain aware) 0.7810219972 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 40] ADVANCE from elapsed time = 1.17 to 1.2 with dt = 0.03 Making slow rhs at time 1.17 for fast variables advancing from 1.17 to 1.18 No-substepping time integration at level 0 to 1.18 with dt = 0.01 Time integration of scalars at level 0 from 1.17 to 1.18 with dt = 0.01 using RHS created at 1.17 Making slow rhs at time 1.18 for fast variables advancing from 1.17 to 1.185 No-substepping time integration at level 0 to 1.185 with dt = 0.015 Time integration of scalars at level 0 from 1.17 to 1.185 with dt = 0.015 using RHS created at 1.18 Making slow rhs at time 1.185 for fast variables advancing from 1.17 to 1.2 No-substepping time integration at level 0 to 1.2 with dt = 0.03 Time integration of scalars at level 0 from 1.17 to 1.2 with dt = 0.03 using RHS created at 1.185 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 40] Advanced 48000 cells Cloud fraction 1.17 0 Coarse STEP 40 ends. TIME = 1.2 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110507532 seconds. TIME= 1.2 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00040 3DPlotfile write time = 0.014284327 seconds. 1-01-01 00:00:01.200000 (1.2 s elapsed) Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471341006 (terrain aware) 0.03471341006 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219783 (terrain aware) 0.7810219783 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 41] ADVANCE from elapsed time = 1.2 to 1.23 with dt = 0.03 Making slow rhs at time 1.2 for fast variables advancing from 1.2 to 1.21 No-substepping time integration at level 0 to 1.21 with dt = 0.01 Time integration of scalars at level 0 from 1.2 to 1.21 with dt = 0.01 using RHS created at 1.2 Making slow rhs at time 1.21 for fast variables advancing from 1.2 to 1.215 No-substepping time integration at level 0 to 1.215 with dt = 0.015 Time integration of scalars at level 0 from 1.2 to 1.215 with dt = 0.015 using RHS created at 1.21 Making slow rhs at time 1.215 for fast variables advancing from 1.2 to 1.23 No-substepping time integration at level 0 to 1.23 with dt = 0.03 Time integration of scalars at level 0 from 1.2 to 1.23 with dt = 0.03 using RHS created at 1.215 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 41] Advanced 48000 cells Cloud fraction 1.2 0 Coarse STEP 41 ends. TIME = 1.23 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110519567 seconds. TIME= 1.23 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00041 3DPlotfile write time = 0.01374075 seconds. 1-01-01 00:00:01.230000 (1.23 s elapsed) Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340999 (terrain aware) 0.03471340999 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219594 (terrain aware) 0.7810219594 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 42] ADVANCE from elapsed time = 1.23 to 1.26 with dt = 0.03 Making slow rhs at time 1.23 for fast variables advancing from 1.23 to 1.24 No-substepping time integration at level 0 to 1.24 with dt = 0.01 Time integration of scalars at level 0 from 1.23 to 1.24 with dt = 0.01 using RHS created at 1.23 Making slow rhs at time 1.24 for fast variables advancing from 1.23 to 1.245 No-substepping time integration at level 0 to 1.245 with dt = 0.015 Time integration of scalars at level 0 from 1.23 to 1.245 with dt = 0.015 using RHS created at 1.24 Making slow rhs at time 1.245 for fast variables advancing from 1.23 to 1.26 No-substepping time integration at level 0 to 1.26 with dt = 0.03 Time integration of scalars at level 0 from 1.23 to 1.26 with dt = 0.03 using RHS created at 1.245 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 42] Advanced 48000 cells Cloud fraction 1.23 0 Coarse STEP 42 ends. TIME = 1.26 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.11028064 seconds. TIME= 1.26 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00042 3DPlotfile write time = 0.013569099 seconds. 1-01-01 00:00:01.260000 (1.26 s elapsed) Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340993 (terrain aware) 0.03471340993 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219405 (terrain aware) 0.7810219405 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 43] ADVANCE from elapsed time = 1.26 to 1.29 with dt = 0.03 Making slow rhs at time 1.26 for fast variables advancing from 1.26 to 1.27 No-substepping time integration at level 0 to 1.27 with dt = 0.01 Time integration of scalars at level 0 from 1.26 to 1.27 with dt = 0.01 using RHS created at 1.26 Making slow rhs at time 1.27 for fast variables advancing from 1.26 to 1.275 No-substepping time integration at level 0 to 1.275 with dt = 0.015 Time integration of scalars at level 0 from 1.26 to 1.275 with dt = 0.015 using RHS created at 1.27 Making slow rhs at time 1.275 for fast variables advancing from 1.26 to 1.29 No-substepping time integration at level 0 to 1.29 with dt = 0.03 Time integration of scalars at level 0 from 1.26 to 1.29 with dt = 0.03 using RHS created at 1.275 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 43] Advanced 48000 cells Cloud fraction 1.26 0 Coarse STEP 43 ends. TIME = 1.29 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110504319 seconds. TIME= 1.29 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00043 3DPlotfile write time = 0.013825622 seconds. 1-01-01 00:00:01.290000 (1.29 s elapsed) Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340986 (terrain aware) 0.03471340986 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219217 (terrain aware) 0.7810219217 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 44] ADVANCE from elapsed time = 1.29 to 1.32 with dt = 0.03 Making slow rhs at time 1.29 for fast variables advancing from 1.29 to 1.3 No-substepping time integration at level 0 to 1.3 with dt = 0.01 Time integration of scalars at level 0 from 1.29 to 1.3 with dt = 0.01 using RHS created at 1.29 Making slow rhs at time 1.3 for fast variables advancing from 1.29 to 1.305 No-substepping time integration at level 0 to 1.305 with dt = 0.015 Time integration of scalars at level 0 from 1.29 to 1.305 with dt = 0.015 using RHS created at 1.3 Making slow rhs at time 1.305 for fast variables advancing from 1.29 to 1.32 No-substepping time integration at level 0 to 1.32 with dt = 0.03 Time integration of scalars at level 0 from 1.29 to 1.32 with dt = 0.03 using RHS created at 1.305 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 44] Advanced 48000 cells Cloud fraction 1.29 0 Coarse STEP 44 ends. TIME = 1.32 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110595384 seconds. TIME= 1.32 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00044 3DPlotfile write time = 0.013542943 seconds. 1-01-01 00:00:01.320000 (1.32 s elapsed) Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134098 (terrain aware) 0.0347134098 (terrain unaware) Anelastic dt at level 0 would be: 0.7810219028 (terrain aware) 0.7810219028 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 45] ADVANCE from elapsed time = 1.32 to 1.35 with dt = 0.03 Making slow rhs at time 1.32 for fast variables advancing from 1.32 to 1.33 No-substepping time integration at level 0 to 1.33 with dt = 0.01 Time integration of scalars at level 0 from 1.32 to 1.33 with dt = 0.01 using RHS created at 1.32 Making slow rhs at time 1.33 for fast variables advancing from 1.32 to 1.335 No-substepping time integration at level 0 to 1.335 with dt = 0.015 Time integration of scalars at level 0 from 1.32 to 1.335 with dt = 0.015 using RHS created at 1.33 Making slow rhs at time 1.335 for fast variables advancing from 1.32 to 1.35 No-substepping time integration at level 0 to 1.35 with dt = 0.03 Time integration of scalars at level 0 from 1.32 to 1.35 with dt = 0.03 using RHS created at 1.335 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 45] Advanced 48000 cells Cloud fraction 1.32 0 Coarse STEP 45 ends. TIME = 1.35 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110589373 seconds. TIME= 1.35 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00045 3DPlotfile write time = 0.013683463 seconds. 1-01-01 00:00:01.350000 (1.35 s elapsed) Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340973 (terrain aware) 0.03471340973 (terrain unaware) Anelastic dt at level 0 would be: 0.7810218839 (terrain aware) 0.7810218839 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 46] ADVANCE from elapsed time = 1.35 to 1.38 with dt = 0.03 Making slow rhs at time 1.35 for fast variables advancing from 1.35 to 1.36 No-substepping time integration at level 0 to 1.36 with dt = 0.01 Time integration of scalars at level 0 from 1.35 to 1.36 with dt = 0.01 using RHS created at 1.35 Making slow rhs at time 1.36 for fast variables advancing from 1.35 to 1.365 No-substepping time integration at level 0 to 1.365 with dt = 0.015 Time integration of scalars at level 0 from 1.35 to 1.365 with dt = 0.015 using RHS created at 1.36 Making slow rhs at time 1.365 for fast variables advancing from 1.35 to 1.38 No-substepping time integration at level 0 to 1.38 with dt = 0.03 Time integration of scalars at level 0 from 1.35 to 1.38 with dt = 0.03 using RHS created at 1.365 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 46] Advanced 48000 cells Cloud fraction 1.35 0 Coarse STEP 46 ends. TIME = 1.38 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.114396495 seconds. TIME= 1.38 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00046 3DPlotfile write time = 0.014133153 seconds. 1-01-01 00:00:01.380000 (1.38 s elapsed) Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340967 (terrain aware) 0.03471340967 (terrain unaware) Anelastic dt at level 0 would be: 0.781021865 (terrain aware) 0.781021865 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 47] ADVANCE from elapsed time = 1.38 to 1.41 with dt = 0.03 Making slow rhs at time 1.38 for fast variables advancing from 1.38 to 1.39 No-substepping time integration at level 0 to 1.39 with dt = 0.01 Time integration of scalars at level 0 from 1.38 to 1.39 with dt = 0.01 using RHS created at 1.38 Making slow rhs at time 1.39 for fast variables advancing from 1.38 to 1.395 No-substepping time integration at level 0 to 1.395 with dt = 0.015 Time integration of scalars at level 0 from 1.38 to 1.395 with dt = 0.015 using RHS created at 1.39 Making slow rhs at time 1.395 for fast variables advancing from 1.38 to 1.41 No-substepping time integration at level 0 to 1.41 with dt = 0.03 Time integration of scalars at level 0 from 1.38 to 1.41 with dt = 0.03 using RHS created at 1.395 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 47] Advanced 48000 cells Cloud fraction 1.38 0 Coarse STEP 47 ends. TIME = 1.41 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.115299374 seconds. TIME= 1.41 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00047 3DPlotfile write time = 0.014476132 seconds. 1-01-01 00:00:01.410000 (1.41 s elapsed) Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0347134096 (terrain aware) 0.0347134096 (terrain unaware) Anelastic dt at level 0 would be: 0.7810218461 (terrain aware) 0.7810218461 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 48] ADVANCE from elapsed time = 1.41 to 1.44 with dt = 0.03 Making slow rhs at time 1.41 for fast variables advancing from 1.41 to 1.42 No-substepping time integration at level 0 to 1.42 with dt = 0.01 Time integration of scalars at level 0 from 1.41 to 1.42 with dt = 0.01 using RHS created at 1.41 Making slow rhs at time 1.42 for fast variables advancing from 1.41 to 1.425 No-substepping time integration at level 0 to 1.425 with dt = 0.015 Time integration of scalars at level 0 from 1.41 to 1.425 with dt = 0.015 using RHS created at 1.42 Making slow rhs at time 1.425 for fast variables advancing from 1.41 to 1.44 No-substepping time integration at level 0 to 1.44 with dt = 0.03 Time integration of scalars at level 0 from 1.41 to 1.44 with dt = 0.03 using RHS created at 1.425 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 48] Advanced 48000 cells Cloud fraction 1.41 0 Coarse STEP 48 ends. TIME = 1.44 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.11357442 seconds. TIME= 1.44 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00048 3DPlotfile write time = 0.014412495 seconds. 1-01-01 00:00:01.440000 (1.44 s elapsed) Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340953 (terrain aware) 0.03471340953 (terrain unaware) Anelastic dt at level 0 would be: 0.7810218273 (terrain aware) 0.7810218273 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 49] ADVANCE from elapsed time = 1.44 to 1.47 with dt = 0.03 Making slow rhs at time 1.44 for fast variables advancing from 1.44 to 1.45 No-substepping time integration at level 0 to 1.45 with dt = 0.01 Time integration of scalars at level 0 from 1.44 to 1.45 with dt = 0.01 using RHS created at 1.44 Making slow rhs at time 1.45 for fast variables advancing from 1.44 to 1.455 No-substepping time integration at level 0 to 1.455 with dt = 0.015 Time integration of scalars at level 0 from 1.44 to 1.455 with dt = 0.015 using RHS created at 1.45 Making slow rhs at time 1.455 for fast variables advancing from 1.44 to 1.47 No-substepping time integration at level 0 to 1.47 with dt = 0.03 Time integration of scalars at level 0 from 1.44 to 1.47 with dt = 0.03 using RHS created at 1.455 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 49] Advanced 48000 cells Cloud fraction 1.44 0 Coarse STEP 49 ends. TIME = 1.47 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110150289 seconds. TIME= 1.47 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00049 3DPlotfile write time = 0.013828412 seconds. 1-01-01 00:00:01.470000 (1.47 s elapsed) Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03471340947 (terrain aware) 0.03471340947 (terrain unaware) Anelastic dt at level 0 would be: 0.7810218084 (terrain aware) 0.7810218084 (terrain unaware) Fixed dt at level 0 is: 0.03 [Level 0 step 50] ADVANCE from elapsed time = 1.47 to 1.5 with dt = 0.03 Making slow rhs at time 1.47 for fast variables advancing from 1.47 to 1.48 No-substepping time integration at level 0 to 1.48 with dt = 0.01 Time integration of scalars at level 0 from 1.47 to 1.48 with dt = 0.01 using RHS created at 1.47 Making slow rhs at time 1.48 for fast variables advancing from 1.47 to 1.485 No-substepping time integration at level 0 to 1.485 with dt = 0.015 Time integration of scalars at level 0 from 1.47 to 1.485 with dt = 0.015 using RHS created at 1.48 Making slow rhs at time 1.485 for fast variables advancing from 1.47 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.03 Time integration of scalars at level 0 from 1.47 to 1.5 with dt = 0.03 using RHS created at 1.485 Done with advance_dycore at level 0 Testing new state for NaNs after advance_microphysics [Level 0 step 50] Advanced 48000 cells Cloud fraction 1.47 0 Coarse STEP 50 ends. TIME = 1.5 DT = 0.03 Testing new state and vels for NaNs at end of timestep Timestep time = 0.110543181 seconds. TIME= 1.5 MASS = 88496977.6 RHO THETA = 2.654909328e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00050 3DPlotfile write time = 0.013907822 seconds. Total Time: 3.33816219 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] AMReX (26.10-76-g347a3a2d2675) finalized